Hi.I want to statically control which know client source IP address (/32) will be redirected or balanced to a specific real server in the server farm.Is it possible to do it in cisco ace? if yes, please explain how to do it?Let explain what I want wi...
I'm trying to set DSCP flags in traffic from ACE 4710 to clients. Unfortunatly it doesn't seem to work this way:!class-map type http loadbalance match-any URL-AF21 2 match http url /aaa/.* 4 match http url /bbb/.*!policy-map type loadbalance http f...
I have an existing policy-map with vip and port 80. Now I need to do:1. Match pool of ip address and url /abc then redirect to url /abc12. If url is ok but ip is out of the pool then redirect to url /abc2It's probably possible to achieve but I have p...
Hi all,Is it posible to use one Cisco WAAS with dual inlineports connected to two PTT routers?Both PTT routers is active and load balacing with BGP wth local L3 switches.Or is it a most to use WCCP?Jan
Hi,Is it possible to check the status of fans on a WAAS using the IOS? I can check the disks but i cant seem to locate a fan area. Other devices you can do a show env but this doesnt seem to work in this situation.
Could anyone put me in the direction of a configuration document or advice on configuring load balancing with LDAP secure port. Ive read various articles about LDAPS not being supported on the ACE, is this correct?I have partially configured this but...
Hi group,First off, thanks for the many insightful comments and answers that can be found on this forum.I am using a Cisco ACE for load-balancing my website, the current configuration looks something like this: probe tcp PROBE_TCP port 80 interval ...
I have a Cisco ACE 4710. Does this device have the ability to do rate limiting/traffic shaping on a per-session basis? For example, if I'm load balancing 2 real servers, can I tell the ACE to limit each session to "XX" amount of bandwidth?
I am implementing a VWAAS Central Manager, version 5.3.3. The old CMS is running on a WAE-612, running version 4.4.7. on the Old CM, under the Device Groups -> AllWAASGroup, there were canned application profiles for all sorts of traffic. Apple-iChat...
I have a colleague trying to upgrade a pair of ACE appliances. The upgrade has been succesfull for the same file downloaded from CCO on other appliances, but when they try the reboot to perform the upgrade, it reports a CRC error, so they abort the u...
Hello, I am interesting in behavior of Cisco ACE HA when deployed in Layer 2 mode. Suppose Active/Standby HA is configured between ACE contexts, and they are operating in Layer 2 bridge mode. Does standby context blocks layer 2 broadcast traffic ?
Hopefully a very easy one for someone to answer - given that the internal backplane (FWSM <-> Cat65xx) and (CSM-S <-> Cat65xx) is automatically generated, and seemingly can't be changed (i.e. our CSM-S works on Po262, or 261 and I think the FWSM is s...
