I've a server configured for http and ftp services in DC. HTTP service is working correctly but ftp not. On wae there is a session for ftp traffic but for customer there is no any result. In branch there is PBR and in DC - wccp. I noticed by server side "tcp checksum error", but I cannot find out why only for ftp? I've branches for which there is no problem at all. Configuration is the same for all branches (PBR). Other issue is that in the same connection (branch-DC) there is lotus optymalization and http on others servers working well in production.
ACE can perform deep packet inspection on HTTP, FTP, DNS, ICMP, and RTSP traffic. Inspections include port 80 misuse, RFC compliance, content/header/URL checksum, FTP reply spoofing, and many others. ACE can also analyze traffic for malformed packets and take corrective action. In a ACE load balanced WAAS context, ACE is in the optimization path, so these deep packet inspections cannot be performed. ACE contexts outside the optimization path can be configured with the deep packet inspection.
checksum incorrect is no problem, I've resoleved my case by configuring new classifier only for ftp traffic. This helped (earlier configuration was working for half of braches - new is working for all and this was my goal)