10-22-2007 10:25 AM
I'm running in a problem where auto-discovery is failing. We have remote-offices with one router and one wae in inline deployment, so far so good, this works perfect.
On the Main-Office we have two routers for redundancy, on the lan site we use hsrp.
Can I use both inline-cards two for each router ?
-----|- inlinegroup1---hsrp-router1-|--mpls
lan--|- inlinegroup2---hsrp-router2-|
or do I have to put both routers behind one pair of inline-card ?
-----|- inlinegroup1-|-hsrp-router1-|
lan--|- inlinegroup1-|-hsrp-router2-|--mpls
Kind Regards
-Lukas
Solved! Go to Solution.
10-24-2007 01:12 AM
Lukas,
If traffic for a connection flows asymmetrically through both inline groups, then CSCsk47177 can prevent optimization. This is schedule to be fixed in the next WAAS maintenance release.
Thanks,
Zach
10-24-2007 01:12 AM
Lukas,
If traffic for a connection flows asymmetrically through both inline groups, then CSCsk47177 can prevent optimization. This is schedule to be fixed in the next WAAS maintenance release.
Thanks,
Zach
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide