cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
802
Views
0
Helpful
2
Replies

waas mobile: memory corrupt error

eric.shang
Level 1
Level 1

I deployed waas mobile 3.5.1 on windows server 2008 64bit. After created about 100 clients, the system encounter memory corrupt errors:

"Data failed to load: Attempted to read or write protected memory. This is often an indication that other memory is corrupt."

How to solve it? Hope experts give me some advice.

1. I can ensure the license is enough.

2. I try to upgrade to version3.5.2, the newest version, problem is still there.

3. Memory is enough, the usage is lower than 60%.

Thank you very much.

2 Replies 2

ktunugun
Cisco Employee
Cisco Employee

Hi Eric,

Looks like some memory hardware related issue.

You can run a memory test to rule out a memory corruption.

http://oca.microsoft.com/en/windiag.asp

Regards

Kiran.

Dear Ktunugun,

We made memory test before, and tested on different server. But memory test is normal but problem still exists.

I guess maybe there are some settings about memory in waas mobile software or in windows2008. But I didn't find any clues in admin guide.

Hope your further suggestion, thank you very much.

2011-09-23

eric.shang

发件人: ktunugun

发送时间: 2011-09-22 19:25:18

收件人: eric shang

抄送:

主题: - Re: waas mobile: memorycorrupt error

Cisco Support Community

Re: waas mobile: memory corrupt error

created by ktunugun in Wide Area Application Services (WAAS) - View the full discussion

Hi Eric,

Looks like some memory hardware related issue.

You can run a memory test to rule out a memory corruption.

http://oca.microsoft.com/en/windiag.asp

Regards

Kiran.

Reply to this message by going to Cisco Support Community

Start a new discussion in Wide Area Application Services (WAAS) at Cisco Support Community

Review Cisco Networking for a $25 gift card