WCCP and Netflow

[s-durando]

Hi everybody,

when configuring WCCPv2 in a Cisco 3640 router with Netflow enabled, I lose the 'DstIf' information in the 'show ip cache flow' output:

SrcIf SrcIPaddress DstIf DstIPaddress Pr SrcP DstP Pkts

Fa0/0 1.5.28.82 Unknown 1.230.7.229 06 E64E D414 2720

Fa2/1 1.230.7.229 Unknown 1.5.28.82 06 D3D6 E646 814

Fa2/1 1.230.7.229 Unknown 1.5.28.82 06 D3DE E64C 327

Fa2/1 1.230.7.229 Unknown 1.5.28.82 06 D3D8 E64A 375

Is it a normal behaviour?

Regards

Stefano

RP-R1#sh ip cache flow

SrcIf SrcIPaddress DstIf DstIPaddress Pr SrcP DstP Pkts

Fa0/0 1.5.28.82 Unknown 1.230.7.229 06 E64E D414 2720

Fa2/1 1.230.7.229 Unknown 1.5.28.82 06 D3D6 E646 814

Fa2/1 1.230.7.229 Unknown 1.5.28.82 06 D3DE E64C 327

Fa2/1 1.230.7.229 Unknown 1.5.28.82 06 D3D8 E64A 375

Fa2/1 1.230.7.229 Unknown 1.5.28.82 06 D3DE E64C 280

Fa2/1 1.230.7.229 Unknown 1.5.28.82 06 D3D7 E648 542

Fa2/1 1.230.7.229 Unknown 1.5.4.50 06 15B3 CA90 4

Fa2/1 1.230.7.229 Unknown 1.5.4.50 06 15B3 CA90 4

[Zach Seils · Accepted solution]

Stefano,

What you are seeing is a known issue, and will be resolved in 12.4(20)T. See CSCsl30451 for more information.

Zach

[s-durando]

Thank you very much Zach!

Regards

Stefano