cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1319
Views
0
Helpful
1
Replies

WCCP Router Identifier

Anand Thakur
Level 1
Level 1

Hi

I am getting the following message while trying to configure WCCP redirection on my 7200 router.

I have added this router to the routerlist of the WAE edge device. Ping is successful, but the following problem prevails.

NASCM-MPLS#show ip wccp

Global WCCP information:

    Router information:

        Router Identifier:                   -not yet determined-

        Protocol Version:                    2.0

    Service Identifier: 61

        Number of Cache Engines:             0

        Number of routers:                   0

        Total Packets Redirected:            0

        Process:                             0

        Fast:                                0

        CEF:                                 0

        Redirect access-list:                WCCP-61Out-Inside

        Total Packets Denied Redirect:       0

        Total Packets Unassigned:            0

        Group access-list:                   -none-

        Total Messages Denied to Group:      0

        Total Authentication failures:       0

        Total Bypassed Packets Received:     0

    Service Identifier: 62

        Number of Cache Engines:             0

        Number of routers:                   0

        Total Packets Redirected:            0

        Process:                             0

        Fast:                                0

        CEF:                                 0

        Redirect access-list:                WCCP-62In-Inside

        Total Packets Denied Redirect:       0

        Total Packets Unassigned:            0

        Group access-list:                   -none-

        Total Messages Denied to Group:      0

        Total Authentication failures:       0

        Total Bypassed Packets Received:     0

Regards,

Anand

1 Reply 1

asharmav
Level 1
Level 1

Hi Anand,

Looks like the router is unable to see the wae engine. Can you paste the wccp related config from the wae devices.

Regards

Abijith