08-13-2014 06:43 AM
Hi,
I want to configure WCCP on Layer2 Redirection on Cisco Router 3800, but only GRE mode is working layer2 redirect is not comming up.
Cisco Router Details: Cisco IOS Software, 3800 Software (C3845-SPSERVICESK9-M), Version 12.4(15)T7, RELEASE
Proposed diagram is attached.
WCCP will be configured on LAN Interface of Router.
Observation: if cashing engine connected on (L3 Switch) LAN side of router, Layer2 Redirection is working fine. But if cashing engine connected on additional interface of router layer2 mode is not working.
08-13-2014 07:28 AM
can you share you configurations @ you router?
also if poosible paste the parameters you have set on caching engine?
Regards
Karthik
08-14-2014 12:28 AM
Hi Karthik,
Please find commands on Router as below and WCCP configuration on Cashing Engines screen is attached --
Router Configuration
Router (config)# access-list 101 permit ip 172.60.10.0 0.0.0.255 172.80.10.0 0.0.0.255
Router (config)# ip wccp 53 redirect-list 101
Router (config)# ip wccp 54 redirect-list 101
Router (config)# interface FastEthernet0/0 (LAN Interface of Router)
Router (config)# ip wccp 53 redirect in
Router (config)# ip wccp 54 redirect in
Router (config)# end
08-14-2014 02:39 AM
Hi Amol,
Have you tried enabling accelarated command in global command?
Regards
Karthik
08-14-2014 11:17 AM
Hi Karthik,
Thanks for quick response.
Issue is WCCP Layer2 is Initializing. If mode change it to GRE then it works fine.
Regards,
Amol
08-19-2014 10:26 PM
Hi Karthik,
Any update on the issue.
08-21-2014 06:03 AM
I have very limted option to try out in lab.... let me try my best to figure out the issue..
Regards
Karthik
08-14-2014 11:16 AM
Hi Karthik,
Thanks for quick response.
Issue is WCCP Layer2 is Initializing. If mode change it to GRE then it works fine.
Regards,
Amol
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide