cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
909
Views
0
Helpful
1
Comments
cisco_admin1
Level 3
Level 3

Read the bioWith Michael Petrinovic

Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about the Unified Computing Systems with Cisco expert Michael Petrinovic. Any configuration or troubleshooting question can be asked.

Michael Petrinovic is a customer support engineer in the Customer Advanced Engineering group at Cisco. He supports data center and unified computing solutions through product testing and early field trials of pre-release hardware and software. His support of advanced and emerging technologies provides valuable product direction, quality, support readiness, and knowledge to Technical Services. Petrinovic is currently focused on the Cisco Unified Computing System and Cisco Nexus 1000V. In his five years at Cisco, he has worked in the Cisco Technical Assistance Center supporting Cisco routing and switching architectures, before moving into data center and server virtualization technologies. He holds CCIE certification (#25330 in Routing & Switching.)  

 

 

 

Remember to use the rating system to let Michael know if you have received an adequate response. 

 

Michael might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the Data Center sub-community discussion forum shortly after the event. This event lasts through August 10, 2012. Visit this forum often to view responses to your questions and the questions of other community members.

 
1 Comment
nbesnet nbesnet
Level 1
Level 1

Hi Team,

 

We have connected the 2 chassis to FI's, From the FI's we have connected to 5K with out port channel and from the 5K we pinned to 1G network switch.

 

It looks configuration all good but network not reachable to any of the blades management.

 

Thanks,

Girish

 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: