cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
606
Views
0
Helpful
4
Replies

SNMP software + MIB base

Hi All,

How can we obtain SNMP MIB base for this switch and what SNMP monitoring software do you recommend?

BR,

Lukasz 

4 Replies 4

Kurt Schumacher
Level 1
Level 1

Hello Lukasz,

Your request is very reasonable, not sure if the MIB file bundles are available on the Cisco downlod http://www.cisco.com/cisco/web/download/index.html for the Small Business products at all. Taking the fact the SNMP support has been expanded (or earlier Linksys/Cisco SB Switch specs not listing the complete information in the product decription), there is some room to enhance:

What we EFT people would certainly like to see is the Cisco CB switches will become a part of the "Cisco standard" Cisco MIBs support-lookup and download feature, reachable over the Cisco download start page -> Cisco MIBs -> Network Management Software -> MIBs Supported by Product -> Information about which MIBs are supported by which Cisco products (-> http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml ) Must be updated by ths Cisco SBSBU with every firmware update, tough.

---

For personal test purposes, iReasoning http://ireasoning.com/ offers their MIB Browser Free Personal Edition, the limitation is in the number of concurrently loaded MIBs - a pure Java application, comes with a WIndows installer or as a tarball for other platforms.

---

Locating MIBs? Most MIB browsers come preloaded with a precompiled set of the RFC standard MIBS.

Fro CISCO private MIBs, start about here:

http://tools.cisco.com/ITDIT/MIBS/servlet/index

or direct

http://tools.cisco.com/Support/SNMP/public.jsp SNMP Object Navigator -> View & Download MIBS

---

Looks like SMB are not to keen on monitoring thier networks...

Regards,

-Kurt.

thudang
Level 1
Level 1

For EFT, I have uploaded the MIB zip file to the following location:  https://supportforums.cisco.com/docs/DOC-12590

We tested the MIBs using SilverCreek software.  We also did verify that they compile with MG-Soft and Unbrowse as well.

Regards,

Thuy

Hello Thuy,

Are the MIBs in this ZIP file a superset, or is really everything supported on the Sx300 Series? I'm highly impressed about the functionality and switching reliability of these switches already.

Reason asking, the Draft Admin Guide SG300-Admin-20100507.pdf lists much less, and starts beyond with Cisco (not CiscoSB) private MIBs:

...
Supported MIBs

The following standard MIBs are supported:


CISCO-CDP-MIB.mib
CISCO-SMI.mib
CISCO-TC.mib
CISCO-VTP-MIB.mib
...

Regards,

-Kurt.

Hi Kurt,

The admin guide needs to be corrected.  The mib zip file is the accurate list of the MIBs supported.

Regards,

Thuy