In reference to the above listed bugg. The bug states that it is for version 12. However we have a client that is version 11.x and we are having the same issue. As well we have someone on version 8x. Same issue. Is there something in the paramete...
Heya
I've been looking for a solution for this. We have 3 standalone Aironet 3500's up and running nicely and the Associations tab shows all of the client devices as Unknown and with NONE as name.
I found 2 articles about the same issue, with no so...
1. The Touchpad gets hanged and we need to disconnect and reconnect it again post it starts working.
2. We lose the camera control also and needed to unplug and plug the tablet to regain control.
Hello,
We faced the same problem on Cisco 4500x Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500e-UNIVERSALK9-M), Version 03.06.03.E RELEASE SOFTWARE (fc3), ROM: 15.0(1r)SG11
Which image is fixing this issue for our sw...
Hi,
For this bug, does it only have fix on 2.1 (0.904) and 2.2 (0.901)?
I didn't found any same version on cisco download website, only available for version 2.1(0.474) and 2.2(0.470).
I believe other than the 2 version listed in "Known Fix Release...
This error reffering to hardware error or Image error ?
this is the error captured:Mod-sfr 835> /Volume: 32925/7258112 files (0.1% non-contiguous), 1398398/29014700 blocksMod-sfr 836> pthread_create failed: Resource temporarily unavailableMod-sfr 83...
Hi, I deployed CPN 4.3.1.0.2 with DP1705, problem is similar in almost all reports.
Only CSV and XML reports showing ok.
I did same workaround but didnt fix anything.
Should I open a TAC/BEMS case?
Thank you and regards.
Hi guys!
I´m having this issue adding a VG320 with CUCM 11.5 and is still no working (only add the Module in Slot 0 / Subunit 0...).
Can any body help me!?
Thanks in advance!
We have often need to send very big dump files to the cisco TAC and unfortunately the ftp server only accepts a maximum of 2G for file.What I do is to split the big files in parts and feed to the ftp server the single parts.
Now another problem is ha...
While going to update phone parameters via BAT, getting below error :-
Update Phones - Query
Begin Time : 08/15/2016 14:20:37
Query :
SET Values :
Failure Details :
name Error Code Error Description
-------------------------------------------------...
Hi
I just would like to know, if the bug CSCvc72794, which is related to the release 16.3.3, has been solved in the release Everest-16.5.1a.
Many thanks
Bug is still alive in Version 11.5.1.12900-21
I have a customer CUCM running this version and i can reproduce this "fixed" bug. I upgraded from 10.5 exactly because of this bug ... nice to find him still alive
This is also affecting V11.8.2 Build 50390
Emoticons are populated, and work with their quick codes, but only the last 200 are so are available for manual selection
