Cisco Bug Discussions

I am trying to test MAB using Cisco ISE (2.0.0.306) for Avaya IP Phones connected to a Brocade ICX 7450 switch stack. I intend to dynamically apply VLAN & ACL settings to the phone. Although I have the VLAN tag as a numerical value, ISE is still unab...

Hello, In CISCO Prime, is there any option to put Unified AP in Maintenance State for specific time period ?

i would like to know if my version 8.2.100. does this version hit this bugs thank you

I'm trying to figure out what the workaround for this bug in PI means. It says to adjust the size of the floor map for the position of the AP's which is clear as mud.

OMG. Cisco releases a security advisory and then "hides" the solution...Seems like they don't want us to fix the problem... Advisory: https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20170201-psc1 Fixed Software For...

Problem from TMS side is that the error is misleading, and can be change to display:"You cannot move a finished conference to a future date/time. Please book a new meeting." Where should I change that? https://bst.cloudapps.cisco.com/bugsearch/bug...

The WAP200, which is still under HW support (EOL Nov 2017) has the same defect as: CSCut29715 These are the same processor/hardware devices, when can we expect this to be addressed? Previously reported here: https://supportforums.cisco.com/discussi...

With come up of Jabber and the accordingly connection issues it's more than helpful that the user should be able to decide what should happen with an incoming call during not register phase. At the moment the admin has to decide and he does not want ...

Hy, is there a possibility to get the Serial number remotly from a Touch 10 device ? I have tried to find somthing in the peripherals Settings from the SX20 or SX10 but there is only shown the  Serial number from the camera. BR Norbert

Hi, I receive the same alerts from my SMA M670 who is at the version 10.0.0-055 since I upgraded my 2 C370 to the version 9.7.2-047. No more message tracking, message reporting on my M670. The Critical message is:   TRANSFER: The following centraliz...

We recently upgraded to 11.5.1.10000-4 and have already received a report of the  "Message could not be delivered" Have others observed improvements after the upgrade or are you still seeing the error reported in this bug as well?

Hello, I need to verify PFR snmp mib tables to understand the Application aware routing stats for Cisco IWAN environment. Could you let me know why these mib attributes not populating the data ?  I read somewhere in older posts that pfrv3 doesn't s...

Hi, it's possible to send us (Customer of this router), a workaround during the time that users can access them domain by IPSEC (IOS, Android, Windows 7 & 10)? Thanks PS: I'm the owner who report this problem

23952 22817 99% 99% 99% R 2937843712 linux_iosd-imag due this error router cpu is taking 99% cpu utilization 

My log: RP/0/RP0/CPU0:Jan 18 08:41:54 ICT: enf_broker[205]: Could not enqueue disconnect fd 1073741888 for pid 5c043              dqueue_top 32768 This log will have any service impact? From the workaround: restart the process from where you are ge...