Hello guys.
Note: First three IP octects changed to x.x.x.
There is an error when trying to collect data through SNMP, items below this following tree (cbgpPeerAddrFamilyPrefixEntry 1.3.6.1.4.1.9.9.187.1.2.4.1) should be all gauge type, but the values are showed as counter, and because of this they are useless in a NMS system:
Take a look.
[userxpto@c1-nms ~]$ snmpwalk -v2c -c MYCOMM x.x.x.101 1.3.6.1.4.1.9.9.187.1.2.4.1
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.1.x.x.x.209.1.1 = Counter32: 762430
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.1.x.x.x.210.1.1 = Counter32: 762430
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.1.x.x.x.244.1.1 = Counter32: 668988
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.1.x.x.x.18.1.1 = Counter32: 649145
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.1.x.x.x.34.1.1 = Counter32: 2
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.1.x.x.x.38.1.1 = Counter32: 2
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.1.x.x.x.70.1.1 = Counter32: 2
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.1.x.x.x.74.1.1 = Counter32: 0
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.1.x.x.x.75.1.1 = Counter32: 0
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.1.x.x.x.78.1.1 = Counter32: 0
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.2.x.x.x.209.1.1 = Gauge32: 537
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.2.x.x.x.210.1.1 = Gauge32: 1530
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.2.x.x.x.244.1.1 = Gauge32: 2
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.2.x.x.x.18.1.1 = Gauge32: 255758532
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.2.x.x.x.34.1.1 = Gauge32: 0
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.2.x.x.x.38.1.1 = Gauge32: 0
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.2.x.x.x.70.1.1 = Gauge32: 199
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.2.x.x.x.74.1.1 = Gauge32: 0
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.2.x.x.x.75.1.1 = Gauge32: 0
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.2.x.x.x.78.1.1 = Gauge32: 0
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.6.x.x.x.209.1.1 = Gauge32: 2074
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.6.x.x.x.210.1.1 = Gauge32: 2074
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.6.x.x.x.244.1.1 = Gauge32: 960892744
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.6.x.x.x.18.1.1 = Gauge32: 0
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.6.x.x.x.34.1.1 = Gauge32: 7063474
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.6.x.x.x.38.1.1 = Gauge32: 7063474
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.6.x.x.x.70.1.1 = Gauge32: 155418093
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.6.x.x.x.74.1.1 = Gauge32: 19242435
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.6.x.x.x.75.1.1 = Gauge32: 19242435
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.6.x.x.x.78.1.1 = Gauge32: 0
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.7.x.x.x.209.1.1 = Gauge32: 0
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.7.x.x.x.210.1.1 = Gauge32: 0
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.7.x.x.x.244.1.1 = Gauge32: 0
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.7.x.x.x.18.1.1 = Gauge32: 0
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.7.x.x.x.34.1.1 = Gauge32: 0
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.7.x.x.x.38.1.1 = Gauge32: 0
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.7.x.x.x.70.1.1 = Gauge32: 0
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.7.x.x.x.74.1.1 = Gauge32: 0
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.7.x.x.x.75.1.1 = Gauge32: 0
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.7.x.x.x.78.1.1 = Gauge32: 0
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.8.x.x.x.209.1.1 = Gauge32: 185
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.8.x.x.x.210.1.1 = Gauge32: 185
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.8.x.x.x.244.1.1 = Gauge32: 122568621
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.8.x.x.x.18.1.1 = Gauge32: 0
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.8.x.x.x.34.1.1 = Gauge32: 202448
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.8.x.x.x.38.1.1 = Gauge32: 202448
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.8.x.x.x.70.1.1 = Gauge32: 6806604
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.8.x.x.x.74.1.1 = Gauge32: 1482592
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.8.x.x.x.75.1.1 = Gauge32: 1482592
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.8.x.x.x.78.1.1 = Gauge32: 0
[userxpto@c1-nms ~]$
Only cbgpPeerAcceptedPrefixes 1.3.6.1.4.1.9.9.187.1.2.4.1.1 that is described as being counter acts as gauge (not incrementing values, but otherwise showing current values).
[userxpto@c1-nms ~]$ snmpwalk -v2c -c MYCOMM x.x.x.101 1.3.6.1.4.1.9.9.187.1.2.4.1.1
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.1.x.x.x.209.1.1 = Counter32: 762431
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.1.x.x.x.210.1.1 = Counter32: 762431
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.1.x.x.x.244.1.1 = Counter32: 668996
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.1.x.x.x.18.1.1 = Counter32: 649156
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.1.x.x.x.34.1.1 = Counter32: 2
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.1.x.x.x.38.1.1 = Counter32: 2
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.1.x.x.x.70.1.1 = Counter32: 2
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.1.x.x.x.74.1.1 = Counter32: 0
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.1.x.x.x.75.1.1 = Counter32: 0
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.1.x.x.x.78.1.1 = Counter32: 0
[userxpto@c1-nms ~]$
Device#show ip bgp neighbors x.x.x.209 | inc xes
Prefixes Current: 51 762438 (Consumes 121990000 bytes)
Prefixes Total: 2074 1047094120
Local Policy Denied Prefixes: -------- -------
Device#
I found searching in the bug database this problem seems to affect other platforms too:
https://quickview.cloudapps.cisco.com/quickview/bug/CSCuj17869
Is there any way to fix this issue? Is really a BUG? Cisco intend to solve this bug in the future OS releases?
I've tested on Nexus 7k and Catalyst C6880-X.
