cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2317
Views
0
Helpful
4
Replies

CISCO-ENTITY-VENDORTYPE-OID-MIB missed OID

8pruzicka
Level 1
Level 1

Hi,

We use CISCO-ENTITY-VENDORTYPE-OID-MIB in our HW Inventory application and I found, that there are missing one OID in this MIB.

It is "cevContainerC7200CCPA" "1.3.6.1.4.1.9.12.3.1.5.172". I can find it via SNMP object navigator, but when I look at MIB file, that there are only .171 and .173 OIDs and .172 is missing.

Do you have idea if it is broken MIB file or it is my fault?

Thank you very much.

Pavel

4 Replies 4

Phillip Remaker
Cisco Employee
Cisco Employee

Seems like there is an older version of the MIB posted.  Thanks for poitning it out.  I have alerted the downstream teams to poke at it.  Thanks to Joe Clarke for chasing them down.

There seems to be quite a few missing again. Not sure when they disappeared. Here is a list from some of our current hardware:

1.3.6.1.4.1.9.12.3.1.3.767 
1.3.6.1.4.1.9.12.3.1.3.952 
1.3.6.1.4.1.9.12.3.1.3.1000
1.3.6.1.4.1.9.12.3.1.3.1001
1.3.6.1.4.1.9.12.3.1.3.1212
1.3.6.1.4.1.9.12.3.1.3.1234
1.3.6.1.4.1.9.12.3.1.3.1235
1.3.6.1.4.1.9.12.3.1.3.1313
1.3.6.1.4.1.9.12.3.1.3.1314
1.3.6.1.4.1.9.12.3.1.3.1685
1.3.6.1.4.1.9.12.3.1.3.1686
1.3.6.1.4.1.9.12.3.1.3.2024

-Craig

Exactly which hardware? Do you have a case open? It's easier to drive a bug report with a customer case attached to it.

Did it work?

 

I am facing similar issue, I do not see any detail being returned from router (NCS6K) when queried for 

CISCO-ENTITY-VENDORTYPE-OID-MIB

 

snmpget -v2c -c public 1.1.1.12  1.3.6.1.4.1.9.12.3.1.7.211

SNMPv2-SMI::enterprises.9.12.3.1.7.211 = No Such Object available on this agent at this OID

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: