Re: CSCvc78510 - Cisco 2702 AP aux port goes to disabled after the AP is rebooted
I'm also having a same sort issue on a Autonomous 2702i AP in combination with 15.3(3)JF10 (18.104.22.168) software, when it is connected to an PoE 802.3af power source. Then when the AP reboots or lost power and come's back online, I need to manually enable the AUX port (it reverts to shutdown in the configuration).
But when the 2702i autonomous AP is connected to an PoE+ 802.3at power source, the AUX port stays operational after the AP reboots of lost power and comes back online.
Is your AP connected to an PoE or PoE+ power source?
The documentation is not clear if you can use the AUX port when the AP is connected to an PoE (802.3af) power source in a particular software version.
Users of Cisco's PRR (Product Returns and Replacement) tool will notice some minor changes to the layout and naming of certain fields in the "Site Information" page, starting on November 18th, 2019.
In addition to these User Interface (UI) formatting cha...
I'm having trouble performing a baremetal install of VIRL 1.6.65 on my Dell Server. I keep getting " failed Executing 'grub-install /dev/nvme0n1'. failed. this is a fatal error" I suspect it has something to do with the Partition Table: gpt.An...
I would like to introduce you to a new process flow called Intelligent RMA Experience (IRE), which is available for a select few product families.
As part of this process, we would like to leverage the CISCO Intellectual capital we have build over...
Welcome to Global Order Management RMA One Source Forum!
The objective of Global Order Management is to ensure every RMA (Returned Material Authorization) is delivered to our customers within agreed commitment. We do it by providing an...