CSCvd36820 - no vstack is not show

[deVacto]

Hi all,

i need help to disable smart install for disable port 4786

but the command "no vstack" is not showing

model : C3560V2 24TS 

IOS : 12.2(53)SE2

----------------

3560#show vstack config
Role: Client
Vstack Director IP address: 0.0.0.0

*** Following configurations will be effective only on director ***
Vstack default management vlan: 1
Vstack management Vlans: none
3560#

3560(config)#no vstack
% Incomplete command.

3560(config)#

3560(config)#no vstack ?
basic Enable vstack director
config Configure default configuration file
dhcp-localserver Configure vstack dhcp parameters
director Configure director's IP address
group Configure a group for vstack
hostname-prefix Specify hostname prefix for Client
image Configure default image file
join-window Configure time interval to enable director
vlan Configure vstack management vlan

-----------------

from i found on the internet, the output seems must be like :

Role: Client (SmartInstall disabled)

Currently i just make the ACL on the port, but its not clear if this feature completely disabled from my management

how to tell the device completely disable like above output? or another method to approve

am i must upgrade the ios? to which version is better

thank you

[Leo Laohoo]

no vstack config

[deVacto]

yes ive done that also, but the output is same
Role: Client
Vstack Director IP address: 0.0.0.0

is it consider as disable? as the other ouput are gave "(SmartInstall disabled)"

[Leo Laohoo · Accepted solution]

---

@deVacto wrote:
as the other ouput are gave "(SmartInstall disabled)"

---

That's because that kind of output is only possible with 12.2(55)SE (and newer).  

Personally, I wouldn't consider using 12.2(53)SE because it is not a secure version to use in production.

[deVacto]

Thanks alot Leo

[Leo Laohoo]

Happy to help. 

How to use Zero-Touch SmartInstall