cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1031
Views
0
Helpful
1
Replies

CSCve92473 - Adapter uplink interface 1/1/1/1 on security module 1 link state unavailable

pro_engineering
Level 1
Level 1

All,

 

Quick question - While adding FTD Logical device in 4110, it generates the critical error as "Adapter uplink interface 1/1/1/1 on security module 1 link state: unavailable. Please check switch blade-facing port status. Resetting security module might be required."And in the fault properties, its showing "Affected Object - sys/chassis/blade/1/adaptor/1/ext-eth-1/fault/F0209". 

 

Furthermore, when i hit Security Engine, the "service State is Non-Responding"

 

This is something new to me, any help is much appreciated!

 

Best,

MU

1 Reply 1

pro_engineering
Level 1
Level 1

Folks,

 

Updating this case - error is resolved now. What i did is, just power off and then power on the security engine. (Note: FP 4110 is not ON AIR as of now and that's why i took he chance to do the Power Off/On thing). 

 

Still it would be great, if we can get to know the procedure or step to troubleshoot this Error while the system is LIVE and running.

 

Best,

MU