CSCvf68802 - With Profinet enabled, "ip default-gateway" configuration gets removed
I question this workaround method, and I hope that someone can explain it better.
If Profinet is enabled by default and you use the "no profinet" command in the global configuration doesn't this disable profinet globally?
If that is true and profinet is required the only real workaround is to downgrade the switch to an earlier release.
Workaround: Issuing the following commands after the upgrade:
0. enable 1. conf t // enter config globally 2. no profinet // disable profinet since it is enabled by default 3. ip default-gateway x.x.x.x // re-config the system with 4. end //exit config mode 4. write mem // Save configuration to startup config 5. Reload // reboot the system
TAGS: Cisco IE, Industrial, profinet, no ip default-gateway, Cisco Bugs
Users of Cisco's PRR (Product Returns and Replacement) tool will notice some minor changes to the layout and naming of certain fields in the "Site Information" page, starting on November 18th, 2019.
In addition to these User Interface (UI) formatting cha...
I'm having trouble performing a baremetal install of VIRL 1.6.65 on my Dell Server. I keep getting " failed Executing 'grub-install /dev/nvme0n1'. failed. this is a fatal error" I suspect it has something to do with the Partition Table: gpt.An...
I would like to introduce you to a new process flow called Intelligent RMA Experience (IRE), which is available for a select few product families.
As part of this process, we would like to leverage the CISCO Intellectual capital we have build over...
Welcome to Global Order Management RMA One Source Forum!
The objective of Global Order Management is to ensure every RMA (Returned Material Authorization) is delivered to our customers within agreed commitment. We do it by providing an...