Hello,
I think I have the same problem. but with an AP AIR-CAP1532E-A-K9.
* Sep 12 18: 29: 46.175: Starting Ethernet promiscuous mode
* Sep 12 18: 29: 46.207:% LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1, changed state to down
* Sep 12 18: 29: 46.223:% DOT11-5-EXPECTED_RADIO_RESET: Restarting Radio interface Dot11Radio0 due to the reason code 10
* Sep 12 18: 29: 46.231:% DOT11-5-EXPECTED_RADIO_RESET: Restarting Radio interface Dot11Radio1 due to the reason code 10
* Sep 12 18: 29: 46.235:% DOT11-5-EXPECTED_RADIO_RESET: Restarting Radio interface Dot11Radio0 due to the reason code 27
* Sep 12 18: 29: 46.235:% DOT11-5-EXPECTED_RADIO_RESET: Restarting Radio interface Dot11Radio1 due to the reason code 27
* Sep 12 18: 29: 46,259:% LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
* Sep 12 18: 29: 46,259:% LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down
* Sep 12 18: 29: 46.263:% DOT11-5-EXPECTED_RADIO_RESET: Restarting Radio interface Dot11Radio0 due to the reason code 10
* Sep 12 18: 29: 46.263:% DOT11-5-EXPECTED_RADIO_RESET: Restarting Radio interface Dot11Radio1 due to the reason code 10
* Sep 12 18: 29: 46.299: SCHED: Ethernet Bridge Process: remove watched boolean System Initialized (62968D74)
* Sep 12 18: 29: 46.299: SCHED: Ethernet Bridge Process: install watched queue Soap BVI input queue (6529B3BC), os: 0 ah: 0
* Sep 12 18: 29: 46.299: No configuration in NVRAM..Auto Install initiated ..
* Sep 12 18: 29: 47.251:% LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
* Sep 12 18: 29: 47.259:% LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
* Sep 12 18: 29: 47.259:% LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
* Sep 12 18: 29: 58.211:% LINK-6-UPDOWN: Interface BVI1, changed state to down
* Sep 12 18: 29: 59.211:% LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to down
The AP is in stand alone mode. The problem happens at all times, even if the AP is not configured.
