cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
377
Views
0
Helpful
0
Replies

CSCvi74050 - 8.3(0)SK(0.71) - SUP2E-F3-100- Interface goes to Hardware failure when enabling SPAN

chenti1019
Level 1
Level 1

Hi Guys

 

I also encountered this issues, my device is the N7710 firmware version is 8.2 (1), is it possible to solve it other than reinstalling the module?

 

show int status | i Eth1/6
Eth1/6 -- faulty 1 auto auto 10Gbase-SR

 

Ethernet1/6 is down (Hardware failure)
admin state is down, Dedicated Interface

 

 %ETHPORT-5-IF_DOWN_HW_FAILURE: Interface Ethernet1/6 is down (Hardware Failure)
 %ETHPORT-5-IF_ADMIN_UP: Interface Ethernet1/6 is admin up .
 %ETHPORT-5-IF_DOWN_HW_FAILURE: Interface Ethernet1/6 is down (Hardware Failure)
 %TACACS-3-TACACS_ERROR_MESSAGE: All servers failed to respond

0 Replies 0