N3K-C3548P-10GX Running 9.3(13).
Problem is still there, even if bug related to 9.2.2
Bug didn't provide much information.
GLC-TE should not have DOM activated. I've confirm the behaviour on a N9K.
This generate log error and monitoring alert.
show interface transceiver details
Ethernet1/XX
transceiver is present
type is 1000base-T
name is CISCO-AVAGO
part number is ABCU-5710RZ-E
revision is A
serial number is AVCXXXXXXXX
nominal bitrate is 1300 MBit/sec
Link length supported for copper is 100 m
cisco id is 3
cisco extended id number is 4
SFP Detail Diagnostics Information (internal calibration)
----------------------------------------------------------------------------
Current Alarms Warnings
Measurement High Low High Low
----------------------------------------------------------------------------
Temperature 0.00 C 0.00 C 0.00 C 0.00 C 0.00 C
Voltage 3.31 V -- 6.55 V 6.55 V 6.55 V 6.55 V
Current 131.07 mA 131.07 mA 131.07 mA 131.07 mA 131.07 mA
Tx Power 8.16 dBm 8.16 dBm 8.16 dBm 8.16 dBm 8.16 dBm
Rx Power -2.08 dBm -- 8.16 dBm 8.16 dBm 8.16 dBm 8.16 dBm
Transmit Fault Count = 0
----------------------------------------------------------------------------
Note: ++ high-alarm; + high-warning; -- low-alarm; - low-warning
*** SFP diagnostics data may be invalid! ***
