Cisco Developed UCS Integrations Knowledge Base

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Field Notice 70545

Knowledge Base Articles

UCS Management Pack 2.0(6) for VMWare vRealize Operations Manager 8.3, 8.4, 8.5 and 8.6 (FIPS and NON-FIPS mode)   This version of the management pack supports VMware vRealize Operations Manager 8.3, 8.4, 8.5 and 8.6 (FIPS and NON-FIPS mode) New prop...

nnatesan by Level 4
  • 55567 Views
  • 62 comments
  • 10 Helpful votes

Cisco UCS PowerTool Core suite is a set of PowerShell Core modules for Cisco UCS Manager, Cisco IMC and Cisco UCS Central, that helps in configuration and management of Cisco UCS domains and solutions. Cisco UCS PowerTool Core modules are developed ...

npetkar by Cisco Employee
  • 1163 Views
  • 0 comments
  • 0 Helpful votes

Cisco UCS PowerTool Core suite is a set of PowerShell Core modules for Cisco UCS Manager, Cisco IMC and Cisco UCS Central, that helps in configuration and management of Cisco UCS domains and solutions.   Cisco UCS PowerTool Core modules are develope...

Ghufz by Cisco Employee
  • 1904 Views
  • 1 comments
  • 0 Helpful votes

Cisco UCS PowerTool Core suite is a set of PowerShell Core modules for Cisco UCS Manager, Cisco IMC and Cisco UCS Central that helps in configuration and management of Cisco UCS domains and solutions.   Cisco UCS PowerTool Core Suite is developed us...

Ghufz by Cisco Employee
  • 4273 Views
  • 3 comments
  • 0 Helpful votes

UCS always recommends to keep vNIC MTU same as that of assigned QoS policy priority class value. Below warning appears when you assign QoS policy to any vNIC.       When the QoS policy is not assigned to vNIC, it takes the best-efforts class.   In ...

vNIC_QoSPolicyWarning.png
rgajjar by Cisco Employee
  • 2733 Views
  • 4 comments
  • 10 Helpful votes

End of Support Notice: Support for the Flex-based Plugin for VMware vSphere has been discontinued.  The HTML based Plugin is recommended as a replacement.   Previous Release Information:   Cisco UCS Manager Plugin is an extension for the vSphere Web ...

ericwill by Cisco Employee
  • 87847 Views
  • 133 comments
  • 37 Helpful votes

Cisco UCS PowerTool Core suite is a set of PowerShell Core modules for Cisco UCS Manager, Cisco IMC and Cisco UCS Central that helps in configuration and management of Cisco UCS domains and solutions.   Cisco UCS PowerTool Core Suite is developed us...

Ghufz by Cisco Employee
  • 3144 Views
  • 0 comments
  • 0 Helpful votes

We are pleased to announce the release of Cisco UCS PowerTool Suite version 2.4.1.   Cisco UCS PowerTool suite is a set of PowerShell modules for Cisco UCS Manager, Cisco IMC and Cisco UCS Central that helps in configuration and management of Cisco U...

Cisco UCS PowerTool Core suite is a set of PowerShell Core modules for Cisco UCS Manager, Cisco IMC and Cisco UCS Central that helps in configuration and management of Cisco UCS domains and solutions.   Cisco UCS PowerTool Core Suite is developed usi...

sumbr by Level 4
  • 16862 Views
  • 5 comments
  • 7 Helpful votes

Create a CSV with the following for column headings.. vmname,nwadapter,nwname,acipg vmname,nwadapter,nwname,acipg vm1, Network Adapter 1, currentpg100, newportgroup100 vm2, Network Adapter 1, currentpg200, newportgroup200 vm2, Network Adapter 2, curr...

James Welch by Cisco Employee
  • 4042 Views
  • 0 comments
  • 5 Helpful votes

#Credentials $vcenterIP = '10.10.10.10' $vcusername = 'cisco@vc.local' $vcpass = 'Cisco123' #Set Variables - change file name an path as needed. Change ESXi cluster name as needed $vmnicscsv = '.\vmnics.csv' $cluster = 'TestCluster' #Connect to v...

James Welch by Cisco Employee
  • 716 Views
  • 0 comments
  • 0 Helpful votes
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Quick Links
Top Contributors

Review Cisco Networking for a $25 gift card