This PowerShell script loads the PowerTool module if needed and then auto launches your browser to the UCSM manager and executes the convert to UCSCmdLet so you can learn how to create PowerShell code elements for UCS easily.
The power of the ConvertTo-UcsCmdlet command is that it allows you to run it, do something in the UCSM GUI and after hitting SAVE in UCSM you can see the PowerShell command for that in your PowerShell Window.
v1.1 - Initial Post
v1.3 - Updated to support extended logging for more convertto-ucscmdlet functionality and added countdown timer to make sure log is ready.
v1.4 - Checks to make sure you are running a minimum of PowerShell V3
v0.4.01 - Changed to a version 0 dot as nothing of mine is a 1 dot :-) Added built in help. Command line options. Standard naming convention.
v0.4.02 - Added support for saved credentials file
As always, let me know if you have any questions, problems or suggestions.
We are attempting to leverage PowerTool to retrieve driver version details based on an uploaded hardware profile. We can complete the process from end-to-end. However, we cannot seem to get any more information other than the VIC (CNA) driver information....
Hello, we want to configure raid in one of our cisco hx220c m5 nodes, however, the default raid controller(hx-sas-m5) doesn't support the raid. Therefore, it would be very helpful if anyone could suggest to me a raid controller that will be supported by t...
Hi all, I am trying to create a BIOS policy using PowerTool and UCSPE with this script:Start-UcsTransaction$newbiospolicy = Add-UcsBiosPolicy -Org $orgs -Name NewBiosPolicy2 -Descr "New powershell ...
I'm working on scripting out config backups of standalone c240 servers using the utils module of the imcsdk for python: https://ciscoucs.github.io/imcsdk_docs/imcsdk.utils.html?highlight=backup_create#imcsdk.utils.imcbackup.backup_create This wo...
I am unfamiliar with vNIC Redundancy Types: Primary and Secondary. What is the purpose and how do they work?I understand Primary is setup with Fabric A, Primary and set the Peer to vNIC B and the setting stay. But how does it work inside a system? Does it...