- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
04-10-2025 10:41 AM
I'm currently using CML Free. In my topology, I can ping nodes connected to the same router but can't ping the server node connected to the same router. I've checked the gateway configurations, but all seems fine
I can ping the gateway from the server, and it's the same with the loopback. Also, from the router, I can ping the server's gateway (port). Can't find what's wrong.
Solved! Go to Solution.
- Labels:
-
Cisco Modeling Labs
Accepted Solutions
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
04-13-2025 10:08 AM
I later checked and discovered that i configured a static IP address on another interface. Thank you!
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
04-10-2025 11:49 AM
Hello @Hdee
Please share router config please.
Thanks.
.ı|ı.ı|ı. If This Helps, Please Rate .ı|ı.ı|ı.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
04-13-2025 10:08 AM
I later checked and discovered that i configured a static IP address on another interface. Thank you!
