Sirs;
I have an Australian NBN (National Fibre Broadband Network) Account with iinet Australia which includes VOIP Phone access and I am connected to the NBN through an ASUS RT-AC88U router to which I have connected a Cisco SPA100 Analogue Telephone Adapter. I have tried installing the adapter according to the instructions provided by Cisco, using the VOIP phone settings provided by iinet. However, the Cisco SPA100 instructions are very limited. The terminology used in the SPA100 instruction manual does not equate clearly to the terminology used by iinet.
Can you please provide me with an explanation of how to connect my phone through the SPA100 adapter using my ISP information below. I have my netphone number, password, PIN number, SIP domain and SIP server, but as I said, these settings to not relate directly to the SPA100 setup which has quite a complicated set of variables to choose from. I have made numerous best guess attempts at installation, but I can't even get a dial tone. Any help would be gratefully appreciated.
ISP Provided Information:
iinet Netphone Number: 0251002007 (Also username)
Password: kuelQGfC8
Pin: 9978
SIP Domain: iinetphone.iinet.net.au
SIP Server: sip.act.iinet.net.au
Yours Sincerely;
Glenn Nattrass
