cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
433
Views
0
Helpful
3
Replies

4507r+e Adding switches - IOS Issues

JES Holdings
Level 1
Level 1

I have a 4507r+e switch as my core.  I am trying to add 1 3850 and a stack of 3650s.  The 4507 is running 15.1(1r)SG5, but the new switches are running 16.1.  When I connected everything, all of my VLANs shutdown.  I assume the issue is my newer switches are at too high level of firmware.  Should I upgrade my core to latest and be set?  Am I missing something else that I need to address?

3 Replies 3

seoyou15es
Level 1
Level 1

I am also facing this problem please help me if you get its solution.

Leo Laohoo
Hall of Fame
Hall of Fame

@JES Holdings wrote:

When I connected everything, all of my VLANs shutdown.


I do not understand this.  Please elaborate further.

JES Holdings
Level 1
Level 1

Every VLAN defined in my core switch shutdown.  When I ran show run, I could see them all with shutdown.  I disconnected the new switches and ran a no shut on each vLAN and everything came back up.