Alarm Name : ISE Authentication Inactivity Details : No Authentication

[Orkhan Hajizada]

Hello! I configured Cisco ISE 3.1. And I get this alarm every 15min. As I understand it just notify me that there is no authentication.        Am I right? Or it means something else and I should fix it ?  Thank you!

[M02@rt37]

Hello @Orkhan Hajizada,

Based on the alarm name and details you provided, it seems that the alarm is indicating that there has been no authentication activity in your Cisco ISE environment. This could mean that there are no devices or users currently attempting to authenticate with ISE, or that there may be an issue preventing successful authentication.

You may also have to check the Cisco ISE logs for any additional information or clues as to why this alarm is being triggered.

[Orkhan Hajizada]

Hello M02@rt37 , thank you for answer. So it's ok with environment, yes? It doesn't mean that something wrong with config ant etc? which i must fix

[M02@rt37 · Accepted solution]

@Orkhan Hajizada,

You may want to check your authentication settings and policies to make sure they are configured correctly and there are no issues with your authentication servers.

Also, you may be able to adjust the threshold for this alarm in the ISE configuration, or you can simply acknowledge the alarm and monitor the situation to ensure that there are no issues with authentication activity.

[Orkhan Hajizada]

M02@rt37  Thank you for your support!