cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
164
Views
0
Helpful
0
Replies

EVPN with IPV6 enabled BVI.... not learning next-hop on 2nd PE

gonilvo4
Level 1
Level 1

So i have EVPN running on an ASR9k using 6.9.2. IPv4 is running fine:

ASR1:

---snip---
show l2route evpn mac-ip evi 2

Fri Aug 30 09:50:35.674 CET

Topo ID Mac Address IP Address Producer Next Hop(s)

-------- -------------- --------------- ----------- ----------------------------------------

2 000d.bc2b.60bf <ipv4-address> LOCAL GigabitEthernet0/0/1/1.998, N/A

2 000d.bc2b.60bf <ipv6-address> LOCAL GigabitEthernet0/0/1/1.998, N/A

2 000d.bc2b.60bf <link-local ipv6-address> LOCAL GigabitEthernet0/0/1/1.998, N/A

---snip---

ASR2:

---snip---
show l2route evpn mac-ip evi 2

Fri Aug 30 10:44:28.857 CET

Topo ID Mac Address IP Address Producer Next Hop(s)

-------- -------------- --------------- ----------- ----------------------------------------

2 000d.bc2b.60bf <ipv4-address> L2VPN <nexthop-loopback>/24006/ME, N/A

---snip---

So, ipv6 traffic comming through ASR2 will not beeing forwarded to the lan-segment. What do i miss in IPv6 ?

0 Replies 0