IR829 - upgrade issue - Failed to install hypervisor image!

[SZ1111]

Hi,

anybody had any issues regarding the upgrade of IR829.

bundle install flash:ir800-universalk9-bundle.SPA.158-3.M6.bin
 Installing bundle image: /ir800-universalk9-bundle.SPA.158-3.M6.bin.......................................................................................................................................................................
 
updating Hypervisor image... 
 Sending file modes: C0444 25177457 ir800-hv.srp.SPA.3.1.13


%Error copy from scp://*:*@127.1.3.1//vds_system/bundle/ir800-hv.srp.SPA.3.1.13 to bootstrap:ir800-hv.srp.SPA.3.1.13 

Make sure SSH source interface is not configured.
Failed to install hypervisor image!

Current version :  15.7(3)M4b

Upgrade version : 15.8.3M6 MD

There is a bug (CSCuz62775) reported but the solution does not work.

Does anybody have a workaround or a solution to the problem ?

[Snotmann]

I came from 15.7(3)M6 too and want to go to 159-3.M3 but no chance ... 20 routers without any problem but this one makes me crazy ... another cisco firmware nightmare ... no ssh loopback configured so far

[SZ1111]

Hi, 

The only way for me was to upgrade it on site with console cable.