After successful upgrade of the IOS system on this WS-C2960L-24TS-LL switch the new version of Cicso Config Professional 1.05 web interface no longer works at all.
I have pointed the switch http server to the CCP html files but still no web interface.
HTTP server status: Enabled
HTTP server port: 80
HTTP server authentication method: local
HTTP server access class: 0
HTTP server base path: flash:/c2960l-universalk9-mz.152-7.E0a/htm
HTTP server help root:
Maximum number of concurrent server connections allowed: 16
Maximum number of secondary server connections allowed: 5
Server idle time-out: 180 seconds
Server life time-out: 180 seconds
Server session idle time-out: 180 seconds
Maximum number of requests allowed on a connection: 25
HTTP server active session modules: ALL
HTTP secure server capability: Present
HTTP secure server status: Enabled
HTTP secure server port: 443
HTTP secure server TLS version: TLSv1.2 TLSv1.1 TLSv1.0
HTTP secure server client authentication: Disabled
HTTP secure server trustpoint:
HTTP secure server active session modules: ALL
--------------------
However the running config doesn't seem to show the pointer to the new html
!
ip default-gateway xx.xx.xx.2
ip http server
ip http authentication local
ip http secure-server
-------------
I NEED THIS TO WORK as I hate doing stuff via command line. I used to use network assistant with the 2950 which worked fine and would use NA with this one as well IF IT WAS SUPPORTED but it isn't.
Has anyone has similar issues with CCP not working after upgrade???
