No Such File or Directory

[scytheofvyse0]

Hello Sir, 
Please help me 

First Boot :

IOS Bootloader - Starting system.
flash is writable
Tide XL MB - 40MB of flash
Xmodem file system is available.
flashfs[0]: 69 files, 8 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 41158656
flashfs[0]: Bytes used: 15145472
flashfs[0]: Bytes available: 26013184
flashfs[0]: flashfs fsck took 12 seconds.
Base Ethernet MAC address: 00:fe:c8:06:fb:ec
Ethernet speed is 100 Mb - FULL Duplex
Loading "flash:/ap3g2-k9w8-mx.153-3.JK6/ap3g2-k9w8-mx.153-3.JK6"...#########################

File "flash:/ap3g2-k9w8-mx.153-3.JK6/ap3g2-k9w8-mx.153-3.JK6" uncompressed and installed, entry point: 0x2003000
executing...

Secondary Bootloader - Starting system.
Montserrat Board
40MB format
Tide XL MB - 40MB of flash
Xmodem file system is available.
flashfs[0]: 69 files, 8 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 41158656
flashfs[0]: Bytes used: 15145472
flashfs[0]: Bytes available: 26013184
flashfs[0]: flashfs fsck took 13 seconds.
flashfs[1]: 0 files, 1 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 12257280
flashfs[1]: Bytes used: 1024
flashfs[1]: Bytes available: 12256256
flashfs[1]: flashfs fsck took 0 seconds.
Base Ethernet MAC address: 00:fe:c8:06:fb:ec
Unable to locate IOS image with name **xx**.
Boot CMD: 'boot flash:/ap3g2-k9w8-mx.153-3.JK6/ap3g2-k9w8-xx.153-3.JK6'
Loading "flash:/ap3g2-k9w8-mx.153-3.JK6/ap3g2-k9w8-xx.153-3.JK6"...##################################################
File "flash:/ap3g2-k9w8-mx.153-3.JK6/ap3g2-k9w8-xx.153-3.JK6" uncompressed and installed, entry point: 0x1003000
executing...

Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706

Cisco IOS Software, C3700 Software (AP3G2-K9W8-M), Version 15.3(3)JK6, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2021 by Cisco Systems, Inc.
Compiled Sat 24-Jul-21 00:50 by mcpre

Montserrat Board
40MB format
Tide XL MB - 40MB of flash
Initializing flashfs...

flashfs[2]: 69 files, 8 directories
flashfs[2]: 0 orphaned files, 0 orphaned directories
flashfs[2]: Total bytes: 40900608
flashfs[2]: Bytes used: 15145472
flashfs[2]: Bytes available: 25755136
flashfs[2]: flashfs fsck took 13 seconds.
flashfs[2]: Initialization complete.
flashfs[4]: 0 files, 1 directories
flashfs[4]: 0 orphaned files, 0 orphaned directories
flashfs[4]: Total bytes: 11999232
flashfs[4]: Bytes used: 1024
flashfs[4]: Bytes available: 11998208
flashfs[4]: flashfs fsck took 1 seconds.
flashfs[4]: Initialization complete.
Copying radio files from flash: to ram:
Copy in progress...CCCCC
Copy in progress...CCC
Copy in progress...CCCC
Copy in progress...CCCC
Copy in progress...CC
Copy in progress...CC
Copy in progress...CCCC
Copy in progress...CC
Copy in progress...CCCCCCCC
Copy in progress...CCCC
Copy in progress...CC
Copy in progress...C
Uncompressing radio files...
...done Initializing flashfs.

Radio0 present 8764 8000 0 A8000000 A8010000 0
Rate table has 650 entries (20 legacy/224 11n/406 11ac)

POWER TABLE FILENAME = ram:/Q2.bin

Radio1 present 8864 8000 0 80000000 80100000 4
POWER TABLE FILENAME = ram:/Q5.bin

Radio2 not present 0 0 0 0 0 8
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco AIR-CAP3702I-F-K9 (PowerPC) processor (revision A0) with 376814K/134656K bytes of memory.
Processor board ID FGL1950XN48
PowerPC CPU at 800Mhz, revision number 0x2151
Last reset from power-on
LWAPP image version 8.10.162.0
1 Gigabit Ethernet interface
2 802.11 Radios

32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:FE:C8:06:FB:EC
Part Number : 73-15243-01
PCB Serial Number : FOC194554U1
Top Assembly Part Number : 068-05054-06
Top Assembly Serial Number : FGL1950XN48
Top Revision Number : A0
Product/Model Number : AIR-CAP3702I-F-K9
% Please define a domain-name first.

Press RETURN to get started!

*Mar 1 00:00:18.567: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed (15)
*Mar 1 00:00:19.027: Registering HW DTLS

*Mar 1 00:00:22.211: %LINK-6-UPDOWN: Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:24.719: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0 (4)
*Mar 1 00:00:24.831: loading Power Tables from ram:/Q2.bin. Class = F
*Mar 1 00:00:24.835: record size of 3ss: 1168 read_ptr: 620BAE6

*Mar 1 00:00:30.059: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 1 (4)
*Mar 1 00:00:30.103: loading Power Tables from ram:/Q5.bin. Class = F
*Mar 1 00:00:30.139: record size of vht: 2904 read_ptr: 620BAE6
APAVC Registering AVC licences on the AP to make sure we enable advanced PP

*Mar 1 00:00:31.591: SCHED: Ethernet Bridge Process: install watched boolean System Initialized(61F3D28), os:1 ah:0APAVC Protocol list already initialized.

*Mar 1 00:00:31.591: Start STILE Activation
APAVC: Succeeded to activate all the STILE protocols.
APAVC: Registering with CFT

*Mar 1 00:00:31.839: APAVC: CFT registration of delete callback succeeded
APAVC: Reattaching Original Buffer pool for system use

*Mar 1 00:00:33.503: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to down
*Mar 1 00:12:24.067: %DOT11-5-EXPECTED_RADIO_RESET: Restarting Radio interface Dot11Radio0 due to the reason code 39
*Mar 1 00:12:24.067: %DOT11-5-EXPECTED_RADIO_RESET: Restarting Radio interface Dot11Radio1 due to the reason code 39
*Mar 1 00:12:24.079: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C3700 Software (AP3G2-K9W8-M), Version 15.3(3)JK6, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2021 by Cisco Systems, Inc.
Compiled Sat 24-Jul-21 00:50 by mcpre
*Mar 1 00:12:24.079: %SNMP-5-COLDSTART: SNMP agent on host AP00fe.c806.fbec is undergoing a cold start
*Mar 1 00:12:24.523: SCHED: Ethernet Bridge Process: remove watched boolean System Initialized(61F3D28)
*Mar 1 00:12:24.523: SCHED: Ethernet Bridge Process: install watched queue Soap BVI input queue(D142F8C), os:0 ah:0
*Mar 1 00:12:24.607: %DOT11-5-EXPECTED_RADIO_RESET: Restarting Radio interface Dot11Radio0 due to the reason code 10
*Mar 1 00:12:24.607: %DOT11-5-EXPECTED_RADIO_RESET: Restarting Radio interface Dot11Radio1 due to the reason code 10
*Mar 1 00:12:24.607: %CDP_PD-4-POWER_OK: Full power - HIGH_POWER inline power source
*Mar 1 00:12:25.739: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
*Mar 1 00:12:26.655: %CAPWAP-5-AP_EASYADMIN_INFO: AP Easy Admin information - EASY_ADMIN is not set, turn off easy admin service!

*Mar 1 00:12:26.655: %CAPWAP-5-AP_EASYADMIN_INFO: AP Easy Admin information - Easy Admin is not enabled, turn it off!

*Mar 1 00:12:26.663: %DOT11-5-EXPECTED_RADIO_RESET: Restarting Radio interface Dot11Radio0 due to the reason code 39
*Mar 1 00:12:26.663: %DOT11-5-EXPECTED_RADIO_RESET: Restarting Radio interface Dot11Radio1 due to the reason code 39
*Mar 1 00:12:26.683: %DOT11-5-EXPECTED_RADIO_RESET: Restarting Radio interface Dot11Radio0 due to the reason code 10
*Mar 1 00:12:26.687: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:12:26.699: %DOT11-5-EXPECTED_RADIO_RESET: Restarting Radio interface Dot11Radio1 due to the reason code 10lwapp_crypto_init: MIC Present and Parsed Successfully

*Mar 1 00:12:26.863: %SSH-5-ENABLED: SSH 2.0 has been enabled
*Mar 1 00:12:26.863: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:12:27.687: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Mar 1 00:12:27.863: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Mar 1 00:12:32.419: %SOAP_FIPS-2-SELF_TEST_HW_SUCCESS: HW crypto FIPS self test passed (2-16)
*Mar 1 00:12:32.419: DPAA Initialization Complete
*Mar 1 00:12:32.419: %SYS-3-HARIKARI: Process DPAA INIT top-level routine exited
*Mar 1 00:12:36.527: %LINK-6-UPDOWN: Interface BVI1, changed state to down
*Mar 1 00:12:37.527: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to down
*Mar 1 00:12:42.455: Currently running a Release Image

*Mar 1 00:12:42.479: Using SHA-2 signed certificate for image signing validation.

User Access Verification

Username:
%Default route without gateway, if not a point-to-point interface, may impact performance
*Mar 1 00:12:54.911: AP image integrity check PASSED

*Mar 1 00:12:54.919: Non-recovery image. PNP Not required.

*Mar 1 00:12:54.931: Cert ISSUER (39): cn=Cisco Manufacturing CA SHA2,o=Cisco

*Mar 1 00:12:54.951: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Mar 1 00:12:56.051: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:12:56.059: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Mar 1 00:12:56.947: %LINK-6-UPDOWN: Interface BVI1, changed state to up
*Mar 1 00:12:57.051: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Mar 1 00:12:57.295: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:12:57.947: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
*Mar 1 00:12:58.295: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
%Error opening flash:/capwap-saved-config (No such file or directory)
%Error opening flash:/capwap-saved-config-bak (No such file or directory)
%Error opening flash:/pnp-saved-config (No such file or directory)
*Mar 1 00:13:04.971: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 255.255.255.255 port 0 CLI Request Triggered
*Mar 1 00:13:05.971: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 255.255.255.255 port 514 started - CLI initiated
*Mar 1 00:13:06.547: %LINK-6-UPDOWN: Interface BVI1, changed state to down
*Mar 1 00:13:07.547: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to down

[Leo Laohoo]

---

@scytheofvyse0 wrote:
Please help me 

---

The AP has boot up fine.  What seems to be the problem?