I have configured PPP multilink between r1 and r2 using one serial interface on each router. Everything is working fine except that interleaving seemed to be disabled in the output of the "show ppp multilink" command. I have included all the necessary show commands to help you help me figure out why interleaving is not working.
Note: To help you run through this quickly, I have highlighted some text with bold red color.
Thank you for any help.
r1#show ppp multilink
Multilink1 Bundle name: r2 Remote Username: r2 Remote Endpoint Discriminator:  r2 Local Username: r1 Local Endpoint Discriminator:  r1 Bundle up for 00:46:06, total bandwidth 128, load 1/255 Receive buffer limit 12000 bytes, frag timeout 1000 ms Interleaving disabled 0/0 fragments/bytes in reassembly list 0 lost fragments, 0 reordered 0/0 discarded fragments/bytes, 0 lost received 0x99 received sequence, 0x119 sent sequence Member links: 1 active, 0 inactive (max 255, min not set) Se1/1, since 00:46:06, 160 weight, 152 frag size No inactive multilink interfaces
Cisco Software Documents /. Get Smart with Cisco Smart Accounts/Smart Licensing and My Cisco Entitlements
Cisco Smart Account is a powerful way to organize assets and entitlements with control over user access. Smart Li...
Cisco® Smart Software Manager On-Prem license server is a component of Cisco Smart Licensing. It works in conjunction with Cisco Smart Software Manager to intelligently manage customer product licenses, providing near-real-time visibility and reporting o...