Upgrading 4400

[yazzir]

Hi 

I am using cisco router 4400 series with this image and version  (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.4(3)S4,  it doesn't support MPLS and I need to enable MPLS . any advise how to do it ?

[Leo Laohoo]

IMPORTANT: Read the Release Notes.
Copy the new IOS into the router's bootflash:, change the boot variable string, save the config and reboot.

[yazzir]

I tried but I can't find plz help how to get the new image that supports
MPLS ?
thanks

[Leo Laohoo]

Can you post the complete output to the following commands:
1. sh version; and
2. sh license feature?
The router needs to have "appxk9" license enabled.

(Go HERE and look under Table 5.)

[yazzir]

Hi Leo

R1-PE1#show version
Cisco IOS XE Software, Version 03.13.04.S - Extended Support Release
Cisco IOS Software, ISR Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version
15.4(3)S4, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2015 by Cisco Systems, Inc.
Compiled Mon 05-Oct-15 11:24 by mcpre


Cisco IOS-XE software, Copyright (c) 2005-2015 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.


ROM: IOS-XE ROMMON

R1-PE1 uptime is 8 minutes
Uptime for this control processor is 10 minutes
System returned to ROM by reload
System image file is
"bootflash:/isr4400-universalk9.03.13.04.S.154-3.S4-ext.SPA.bin"
Last reload reason: PowerOn



This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found
at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.


Technology Package License Information:

-----------------------------------------------------------------
Technology Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------
appx None None None
uc None None None
security None None None
ipbase ipbasek9 Permanent ipbasek9

cisco ISR4431/K9 (1RU) processor with 1687137K/6147K bytes of memory.
Processor board ID FGL204910Y5
4 Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
4194304K bytes of physical memory.
7081983K bytes of flash memory at bootflash:.

Configuration register is 0x2102


R1-PE1#show license feature
Feature name Enforcement Evaluation Subscription Enabled
RightToUse
appxk9 yes yes no no
yes
uck9 yes yes no no
yes
securityk9 yes yes no no
yes
ipbasek9 no no no yes no
cme-srst yes yes no no
yes
hseck9 yes no no no no
throughput yes yes no no
yes
internal_service yes no no no no