Hi,
-----------------------------------------
interface Vlan100
description *** ASR to Switch as a trunk port ***
ip vrf forwarding Banana
ip address 10.12.8.15 255.255.255.240
standby version 2
standby 28 ip 10.12.8.16
standby 28 preempt
standby 28 authentication vlan100
no shutdown
exit
interface Port-channel8
switchport trunk allowed vlan add 100
exit
______________________________________________
How do I migrate this config to an ASR9K running XR? I think its
interface TenGigE0/0/0/1.100 l2transport
encapsulation dot1q 100
rewrite ingress tag pop 1 symmetric
l2vpn
bridge group vlans
bridge-domain vlan100
interface TenGigE0/0/0/0/1.100
but where do I put the HSRP and layer 3 addresses?, for now its just one vlan (100) I may need to add more vlans to it eventually so this needs to be a trunk port. I think I add the VRF statement in the interface command and how do I create a port channel to allow the vlans to traverse the trunk
Thanks