Dear Friends,
Hope you all are doing well.
Recently I have faced some problem during CISCO 12416 GSR router booting time.
Router shows some messages, which I saw first time from my router.
It tells to upgrade fabric downloader from v4.1 to v6.1
and showing some error ..fabric bandwidth change : shutting down card no 2..3..4. (all the card one by one )
How could I resolve this issue.
Router show run and error image given below-
RP/0/1/CPU0:DHK-CORE-RTR01#sh version
Tue Jun 15 14:21:46.440 UTC
Cisco IOS XR Software, Version 4.3.1[Default]
Copyright (c) 2013 by Cisco Systems, Inc.
ROM: System Bootstrap, Version 12.00(20101111:181729) [rom mon 2.4dev(0.67)] DEVELOPMENT SOFTWARE
Copyright (c) 1994-2010 by cisco Systems, Inc.
DHK-CORE-RTR01 uptime is 11 hours, 9 minutes
System image file is "disk0:c12k-os-mbi-4.3.1/mbiprp-rp.vm"
cisco 12416/PRP (7457) processor with 3670016K bytes of memory.
7457 processor at 1265Mhz, Revision 1.1
Cisco 12416 320 G
2 Cisco 12000 Series Performance Route Processors
3 Cisco 12000 Series SPA Interface Processor-601/501/401
3 Management Ethernet
1006k bytes of non-volatile configuration memory.
2049856k bytes of disk0: (Sector size 512 bytes).
996400k bytes of disk1: (Sector size 512 bytes).
65536k bytes of Flash internal SIMM (Sector size 256k).
Configuration register on node 0/1/CPU0 is 0x2102
Boot device on node 0/1/CPU0 is disk0:
Package active on node 0/1/CPU0:
V 4.3.1[Default], Cisco Systems, at disk0:iosxr-service-4.3.1
Built on Sun May 12 07:34:28 UTC 2013
