cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
483
Views
0
Helpful
1
Replies

Cisco ASA5550 upgrade from 7.2.5 to 8.0.x crash

emil.fung
Level 1
Level 1

Dears,

 

I got a problem when I was upgrading ASA5550 from 7.2.5 to 8.0.x  It kept crashing and reboot repeatedly. Crash log as attachment. Guys pls help me. Thanks.

 

# show version

Cisco Adaptive Security Appliance Software Version 7.2(5)
Device Manager Version 7.6(2)150

Compiled on Tue 11-May-10 09:31 by builders
System image file is "disk0:/asa725-k8.bin"
Config file at boot was "startup-config"

ASANET57 up 18 mins 32 secs

Hardware: ASA5550, 4096 MB RAM, CPU Pentium 4 3000 MHz
Internal ATA Compact Flash, 256MB
BIOS Flash M50FW080 @ 0xffe00000, 1024KB

Encryption hardware device : Cisco ASA-55x0 on-board accelerator (revision 0x0)
Boot microcode : CNlite-MC-Boot-Cisco-1.2
SSL/IKE microcode: CNlite-MC-IPSEC-Admin-3.03
IPSec microcode : CNlite-MC-IPSECm-MAIN-2.05
0: Ext: GigabitEthernet0/0 : address is 0021.a0af.f028, irq 9
1: Ext: GigabitEthernet0/1 : address is 0021.a0af.f029, irq 9
2: Ext: GigabitEthernet0/2 : address is 0021.a0af.f02a, irq 9
3: Ext: GigabitEthernet0/3 : address is 0021.a0af.f02b, irq 9
4: Ext: Management0/0 : address is 0021.a0af.f027, irq 11
5: Int: Internal-Data0/0 : address is 0000.0001.0002, irq 11
6: Int: Not used : irq 5
7: Ext: GigabitEthernet1/0 : address is 001b.d4ca.5f37, irq 255
8: Ext: GigabitEthernet1/1 : address is 001b.d4ca.5f38, irq 255
9: Ext: GigabitEthernet1/2 : address is 001b.d4ca.5f39, irq 255
10: Ext: GigabitEthernet1/3 : address is 001b.d4ca.5f3a, irq 255
11: Int: Internal-Data1/0 : address is 0000.0003.0002, irq 255
The Running Activation Key is not valid, using default settings:

Licensed features for this platform:
Maximum Physical Interfaces : Unlimited
Maximum VLANs : 250
Inside Hosts : Unlimited
Failover : Active/Active
VPN-DES : Enabled
VPN-3DES-AES : Disabled
Security Contexts : 2
GTP/GPRS : Disabled
VPN Peers : 5000
WebVPN Peers : 2

This platform has an ASA 5550 VPN Premium license.

Serial Number: JMX1314L2G2
Running Activation Key: 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000
Configuration register is 0x1
Configuration last modified by enable_15 at 16:11:18.610 hk Thu Aug 30 2018

1 Reply 1

emil.fung
Level 1
Level 1

Pls see the crash log as attachment.