cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

OpenStack Kolla Mitaka Availability in Cisco DevNet Learning Labs

As an update to the OpenStack Learning Labs in the Cisco DevNet site, a new version of the lab including OpenStack Mitaka deployed using Kolla is now available.

OpenStack Kolla provides tools to deploy OpenStack services as Docker containers and to upgrade easily. To help developers and admins wanting to explore Kolla and OpenStack, we now have an updated virtual machine image available in DevNet with the Mitaka version of OpenStack.

Visit the Cisco DevNet OpenStack site and launch the learning lab by clicking the Learn -> Openstack on your Laptop.

Feel free to post follow up questions and discussions here in the OpenStack DevNet Community.

10 Comments
eckelcu
Cisco Employee

Thanks for your work putting this together. I shared with people during my OpenStack talk this week at the Red Hat Summit, and they found it to be very educational and useful.

Billy Somers
Beginner

Is there a link to the ciscolive_kolla_mitaka.ova file anywhere?

eckelcu
Cisco Employee

Billy, if using one of the learning lab stations the CiscoLive event this week in Vegas, the OVA should be on the desktop of each machine. If using your own laptop, you can access the OpenStack learning lab directly at

https://learninglabs.cisco.com/#/labs/openstack-install/step/1

Once there, there is a link at the top of each step that says something along the lines of "Setting up your Own Machine". If you click on that it opens up additional instructions, including the link from which to download the OVA.

jvikman
Cisco Employee

The disk size was too small for what I wanted to do, can I create my own .ova with a bigger disk?

eckelcu
Cisco Employee

Sure. Within VirtualBox, power off the VM, go to Settings -> Storage, remove the existing 40 GB disk, and create a new 60 GB disk.

Then from the command line, use the clonemedium command to copy the old disk to the new disk, then add the new 60 GB disk. See (Chapter 8. VBoxManage) for details.

ambi
Beginner

is it possible to run this ova on vmware fusion or does it work only on virtual box

eckelcu
Cisco Employee

It should work with Fusion, but I how not tested/verified that. Please give it a try and let us know how it goes.

ambi
Beginner

I tried using this in Fusion with similar vmnet adapters but it doesnt seem

to work

ifconfig in the VM doesnt list the ip addresses set

eckelcu
Cisco Employee

When you say "in the VM", do you mean in the VM that should be at 10.200.200.10, or within a VM that you launched within OpenStack?

Within the VM that should be at 10.200.200.10, I get the following:

[osdev@operator ~]$ ifconfig

docker0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500

        inet 172.17.0.1  netmask 255.255.0.0  broadcast 0.0.0.0

        inet6 fe80::42:9ff:fe5c:a008  prefixlen 64  scopeid 0x20<link>

        ether 02:42:09:5c:a0:08  txqueuelen 0  (Ethernet)

        RX packets 8  bytes 536 (536.0 B)

        RX errors 0  dropped 0  overruns 0  frame 0

        TX packets 17  bytes 2048 (2.0 KiB)

        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

enp0s3: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500

        inet 10.200.200.10  netmask 255.255.255.0  broadcast 10.200.200.255

        inet6 fe80::a00:27ff:fe4a:1eca  prefixlen 64  scopeid 0x20<link>

        ether 08:00:27:4a:1e:ca  txqueuelen 1000  (Ethernet)

        RX packets 63  bytes 7901 (7.7 KiB)

        RX errors 0  dropped 0  overruns 0  frame 0

        TX packets 63  bytes 9326 (9.1 KiB)

        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

enp0s8: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500

        inet6 fe80::a00:27ff:fe46:bef3  prefixlen 64  scopeid 0x20<link>

        ether 08:00:27:46:be:f3  txqueuelen 1000  (Ethernet)

        RX packets 0  bytes 0 (0.0 B)

        RX errors 0  dropped 0  overruns 0  frame 0

        TX packets 10  bytes 828 (828.0 B)

        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

enp0s9: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500

        inet 10.100.100.10  netmask 255.255.255.0  broadcast 10.100.100.255

        inet6 fe80::a00:27ff:fe74:3368  prefixlen 64  scopeid 0x20<link>

        ether 08:00:27:74:33:68  txqueuelen 1000  (Ethernet)

        RX packets 0  bytes 0 (0.0 B)

        RX errors 0  dropped 0  overruns 0  frame 0

        TX packets 25  bytes 3851 (3.7 KiB)

        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536

        inet 127.0.0.1  netmask 255.0.0.0

        inet6 ::1  prefixlen 128  scopeid 0x10<host>

        loop  txqueuelen 0  (Local Loopback)

        RX packets 8150  bytes 2826165 (2.6 MiB)

        RX errors 0  dropped 0  overruns 0  frame 0

        TX packets 8150  bytes 2826165 (2.6 MiB)

        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

qbr67a7e153-c8: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1450

        ether 32:8d:fe:2f:60:0d  txqueuelen 0  (Ethernet)

        RX packets 6  bytes 396 (396.0 B)

        RX errors 0  dropped 0  overruns 0  frame 0

        TX packets 0  bytes 0 (0.0 B)

        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

qvb67a7e153-c8: flags=4419<UP,BROADCAST,RUNNING,PROMISC,MULTICAST>  mtu 1450

        inet6 fe80::308d:feff:fe2f:600d  prefixlen 64  scopeid 0x20<link>

        ether 32:8d:fe:2f:60:0d  txqueuelen 1000  (Ethernet)

        RX packets 8  bytes 648 (648.0 B)

        RX errors 0  dropped 0  overruns 0  frame 0

        TX packets 8  bytes 648 (648.0 B)

        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

qvo67a7e153-c8: flags=4419<UP,BROADCAST,RUNNING,PROMISC,MULTICAST>  mtu 1450

        inet6 fe80::d82a:bff:fe70:58d5  prefixlen 64  scopeid 0x20<link>

        ether da:2a:0b:70:58:d5  txqueuelen 1000  (Ethernet)

        RX packets 8  bytes 648 (648.0 B)

        RX errors 0  dropped 0  overruns 0  frame 0

        TX packets 8  bytes 648 (648.0 B)

        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

vethda7dfb5: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500

        inet6 fe80::d8dc:59ff:fef3:a605  prefixlen 64  scopeid 0x20<link>

        ether da:dc:59:f3:a6:05  txqueuelen 0  (Ethernet)

        RX packets 8  bytes 648 (648.0 B)

        RX errors 0  dropped 0  overruns 0  frame 0

        TX packets 25  bytes 2696 (2.6 KiB)

        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

What do you get?

ambi
Beginner

The output is similar when u run the VM on virtual box however in Fusion you see only 3 Nics

the fusion is set as the vbox vm in terms of network adapters and ip addresses

Create
Recognize Your Peers
Content for Community-Ad