Hi there.
There are chapter SBC/ALG Package in Broadworks SIP Phone Interoperability Test Plan.
Test setup for SBC/ALG tests:
1) Make sure the DUT is configured with a private address.
2) Enable the DUT’s outbound proxy setting and configure as the SBC address fronting
the BroadWorks Application Servers.
3) Make sure the DUT’s SIP proxy/domain and SIP registrar settings are still configured
with the BroadWorks Application Server domain.
4) Configure the DUT to use symmetric UDP.
5) Assign the BroadWorks Authentication service to the DUT.
6) Configure the BroadWorks Authentication service with authentication user name and
password.
7) Configure the DUT with matching authentication user name and password.
PUBLIC INTEROPERABILITY SYSTEM INSTRUCTIONS: The Public Interoperability System
has two SBC devices available for testing. The SBC addresses are identified in section 4 Public
Interoperability System Information.
Make sure the DUT is on private address space but is not behind another SBC/ALG or SIPaware
firewall.
So, my question is - does Cisco Sandbox Broadworks solution have any SBCs/ALGs available for testing?
