Getting UDLD errors on 9300

[JonFen1]

We just moved from Brocade to Meraki and some of our uplink ports are getting UDLD outbound errors on mainly the 9300. here are 2 different switches and different SFP modules and still getting the issue although we have some that are not getting any at all. We have an HPE core but I don't see how that can be the problem. Any thought or Ideas out there

C9300-48Pf8:39:18:92:92:80
UDLD unidirectional link detection on port 1/C9300-NM-8X/1
SFP module CISCO-MERAKI - 10GBASE-SR: 10.3 Gbps (Part FTLX8574D3BCLMC8, Serial: FNS27040FDU )

C9300-48Pf8:39:18:81:d8:80
UDLD unidirectional link detection on port 1/C9300-NM-8X/1
UDLD Unidirectional link (outbound fault) (neighbor ID: B4DF91046A56, port: 50)
SFP module CISCO-AVAGO - 10GBASE-SR: 10.3 Gbps (Part SFBR-709SMZ-CS2, Serial: AVD2322DCD0 )

[Philip D'Ath]

I have had lots of issues with UDLD errors on the 9300. I think it has some issues in this area.

I'd turned UDLD off.

[JonFen1]

how did you do that? I sent an email to Meraki support and they said it cannot be turned off

[annmarie24us1]

I have the same experience as well with the UDLD errors on the 9300 and have done the same.

[JonFen1]

how did you do that? I sent an email to Meraki support and they said it cannot be turned off

[jcgvt]

anyone ever hear more from Meraki on this? I too am seeing UDLD errors on the C9300 side of a EPL layer 2 link between a C9300 and a MS390.