11-03-2022 01:47 AM
Hello,
Can someone share a config fragment that configures "passive-interface default" as well as a "no passive-interface vlan100".
Cannot seem to find a solution to push both.
IOS-XE 17.6 on Cat9400.
Regards,
Erik
01-05-2023 09:09 AM - edited 01-05-2023 09:14 AM
Hi @etamminga,
The Cisco-IOS-XE-17.6.1 Release Yang Models can be found here:
https://github.com/YangModels/yang/tree/main/vendor/cisco/xe/1761
For OSPF, I looked here:
Hope this helps!
01-05-2023 12:10 PM
Hi Erik
There was /native/router/ios-ospf:ospf/ios-ospf:disable, but this is obsolete by now. Actually I tried to workaround it, but didn't find a solution. So I just posting here, to keep notified once someone come up with a solution.
Marcel
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide