Hello,
could you please provide some snmpset commands to add, modify and delete vlan table entries on CBS350-16T-2G switches?
I can create VLAN
SNMPv2-SMI::mib-2.17.7.1.4.3.1.5.3 = INTEGER: 4 (create and go)
SNMPv2-SMI::mib-2.17.7.1.4.3.1.1.3 = STRING: "vlan3" (vlan name)
to add port 3 to vlan3 I used this OID's but it doesn't work
SNMPv2-SMI::mib-2.17.7.1.4.3.1.2.3 = Hex-STRING: “0x20” (This is bit map representation of ports on device in HEX format, and have to fill something even for 0)
SNMPv2-SMI::mib-2.17.7.1.4.3.1.3.3 = Hex-STRING: “0x00” (This field has the same definition as static field)
SNMPv2-SMI::mib-2.17.7.1.4.3.1.4.3 = Hex-STRING: “0x20” (This field has the same definition as static field)
Thanks
