Cisco Devnet Sandbox not loading

[danbakes90]

Hi,

I am able to access sand-box page and reserve sandbox but it fails to load around 3 minutes in and this has happened Sunday and today.  I could really use Cisco Modelling lab access.

Please help

Thanks in advance

BR

Dan

[ecorban]

hello,

we have seen issues with CML spin up today and are working through them. if u happen to attempt an new sandbox reservation, and if in error note it down and post it here we will look into it. usually the failures can occur due to license, vpn login,vm failure to spin up, or a failure to connect from the user side over the vpn due to fw restrictions. 

can you give it another go and let us know.

Best regards

Eddie  

[danbakes90]

Hi,

I am logged in now though slow to do so, I have uploaded some labs but cant start them on or open them to start the devices individually

Thanks for your help so far, not usable as yet note the server disconnect error message bottom right

[cid:a5eb3460-57ad-4dcb-a9bc-64d1d27366c9]

[ecorban]

hello Dan,

do you know if the topologies your trying to upload to CML have the correct node definitions available n the CML virtual machine ? Any nodes defined in your topology that arent defined in CML will be an issue please note we have a 20 node limit on the CML instances in sandbox. 

Rather than trying to upload an topology to CML, could u confirm if the default topology in CML sandbox  starts up the nodes ? or if you can build a topology (1 or 2 nodes) on the UI will startup for u ? 

BTW, the screenshot didnt load on the message you sent. 

keep me posted.

[danbakes90]

Hi,

Seems to be working ok slow to load but looking good - i will keep you posted

BR
Dan