Nexus Dashboard Multisite Setup

[khan-ammir]

I have created multisite setup and i see router being exchanged and remote sites leafs are populated. I see that i cannot ping from one site to another. I just want to know if this is due to some limitation related to sandbox or something wrong with configuration.

Ive attached configs. Again, my bgp l2vpn configs are established, routes are exchanged and they can be seen cross fabrics but not able to ping.

[balaji.bandi]

This is not an issue with the sandbox, as far as I know. Check the Route Learned; make sure your border routers are configured as expected.

Post some output here to understand the issue.

some reference :

https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/whitepaper-c11-742114.html

[julian.bendix]

Data Plane and Control Plane are separate things 😉

Seems you forgot to attach config and such. From where to where are you pinging?

[julian.bendix]

Same here ... 

Data Plane and Control Plane are separate things 🙂

Seems you forgot to attach config and such. From where to where are you pinging?