Hi David,
Please check HW VPN sample settings below.
- groupname may vary on vlan you assigned, please reach us when your lab ready and we will send you the corresponding groupname.
- username & password can be pasted from the lab ready mail
!---------Config Section 2 | VPN Config---------------!
interface Virtual-Template1 type tunnel
no ip address
tunnel mode ipsec ipv4
!
ip dhcp pool SDM-POOL
option 150 ip 10.10.20.1
!
crypto ipsec client ezvpn TRAFFIC
connect auto
ctcp
group groupname_vary key groupname_vary
mode network-extension
virtual-interface 1
peer 64.103.37.21
username yourid password yourpasswd
xauth userid mode local
!
interface FastEthernet4
crypto ipsec client ezvpn TRAFFIC
!
interface Vlan1
crypto ipsec client ezvpn TRAFFIC inside