10-02-2012 06:23 PM - editado 03-21-2019 04:44 PM
Hello:
I'd like to know whether I could use an HSRP virtual IP address configured as a next-hop in a PBR.
For example (please see attached drawing):
Router 1
interface ethernet 0 ip address 1.0.0.1 255.255.255.0 standby 1 ip 1.0.0.3 standby 1 preempt standby 1 priority 110Router 2
interface ethernet 0 ip address 1.0.0.2 255.0.0.0 standby 1 ip 1.0.0.3 standby 1 preempt
Router 3 (L3 switch):
interface ethernet 0 description TO_ROUTER_1
switchport mode access
switchport acces vlan 10
interface VLAN 10 ip address 1.0.0.100 255.255.255.0interface ethernet 1 description TO_ROUTER_2
switchport mode access
switchport acces vlan 10
interface VLAN 20 ip address 2.0.0.1 255.255.255.0
ip policy route-map INTERNET
ip access-list standard LAN
permit 2.0.0.0 0.0.0.255
route-map internet permit 10
match ip address LAN
set ip next-hop 1.0.0.3
Thanks in advance for your help!!!!
el 10-05-2012 01:41 PM
Hello David,
This should work with no problem at all.
Regards,
Julio
Remember to rate all of the support forum answers.
Descubra y salve sus notas favoritas. Vuelva a encontrar las respuestas de los expertos, guías paso a paso, temas recientes y mucho más.
¿Es nuevo por aquí? Empiece con estos tips. Cómo usar la comunidad Guía para nuevos miembros
Navegue y encuentre contenido personalizado de la comunidad