No puedo habilitar lanbase-routing

[derek1804]

Buenas tardes,

Tengo un Swtich cisco catalyst 2960-s series SI

SW Version 12.2(55)SE5

No me acepta el comando sdm prefer lanbase-routing.

Alguien sabe si mi version de sofware acepta esta modalidad en la plantilla SDM.

Segun esta guia dice para version 12.2(55)SE  http://www.cisco.com/en/US/docs/switches/lan/catalyst2960/software/release/12.2_55_se/configuration/guide/swsdm.html

Pero no se si porque la mia diga 12.2(55)SE5 no se pueda.

Espero alguien me ayude, mil gracias.                  

[bzendeja]

Hola Derek,

Checando  el link que usaste de referencia podemos ver que para soportar ese  template necesitas estar corriendo la imagen lan base:

Catalyst 2960-S switches running the LAN base image support only a default template and the lanbase-routing template.

The  lanbase-routing template is supported only on switches running Cisco  IOS Release 12.2(55)SE or later and the LAN base image.

¿Tu switch está corriendo este feature set? Puedes anexar un show version o lo puedes validar en el sitio de feature navigator:

http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp

Déjame saber si esta información te ayuda.

Saludos,

Bernardo

[derek1804]

Cisco IOS Software, C2960S Software (C2960S-UNIVERSALK9-M), Version 12.2(55)SE5,

RELEASE SOFTWARE (fc1)

Technical Support:

http://www.cisco.com/techsupport

Copyright (c) 1986-2012 by Cisco Systems, Inc.

Compiled Thu 09-Feb-12 19:22 by prod_rel_team

Image text-base: 0x00003000, data-base: 0x01B00000

ROM: Bootstrap program is Alpha board boot loader

BOOTLDR: C2960S Boot Loader (C2960S-HBOOT-M) Version 12.2(55r)SE, RELEASE SOFTWA

RE (fc1)

Switch uptime is 2 hours, 20 minutes

System returned to ROM by power-on

System image file is "flash:/c2960s-universalk9-mz.122-55.SE5/c2960s-universalk9

-mz.122-55.SE5.bin"

　

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

cisco WS-C2960S-48TS-S (PowerPC) processor (revision G0) with 131072K bytes of m

emory.

Processor board ID FOC1704W2C7

Last reset from power-on

1 Virtual Ethernet interface

1 FastEthernet interface

50 Gigabit Ethernet interfaces

The password-recovery mechanism is enabled.

512K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address : 20:BB:C0:80:6E:00

Motherboard assembly number : 73-12424-08

Power supply part number : 341-0327-04

Motherboard serial number : FOC17040VMY

Power supply serial number : LIT16510806

Model revision number : G0

Motherboard revision number : A0

Model number : WS-C2960S-48TS-S

Daughterboard assembly number : 73-11933-04

Daughterboard serial number : FOC17040GGT

System serial number : FOC1704W2C7

Top Assembly Part Number : 800-32452-05

Top Assembly Revision Number : A0

Version ID : V05

CLEI Code Number : COMGK00ARE

Daughterboard revision number : A0

Hardware Board Revision Number : 0x01

　

Switch Ports Model SW Version SW Image

------ ----- ----- ---------- ----------

* 1 50 WS-C2960S-48TS-S 12.2(55)SE5 C2960S-UNIVERSALK9-M

　

Configuration register is 0xF

Mil Gracias

[bzendeja · Accepted solution]

Gracias por la información Derek. El equipo que tienes viene con la licencia Lan Lite por lo que no va a soportar esta configuración:

The SDM template used by Catalyst 2960-S running LAN Lite image is a default templates and is not configurable.

Tu equipo es Lan Lite:

Q. How can I tell the difference between the LAN Base and LAN Lite switches for the Cisco Catalyst 2960-S Series?

A. On the front of the switch, in the top right corner, the LAN Lite  switches have "Catalyst 2960-S Series SI." The LAN Base switches have  "Catalyst 2960-S Series."

From  the rear of the Cisco Catalyst 2960-S Series Switch, the LAN Lite  models do not support stacking. The left side will not have a location  for the FlexStack module to be inserted.

From the Cisco IOS^® Software command line, there are two ways to tell which software image the switch has.

1. The last letter in the product ID. If the last letter is "-L," it's LAN Base. If it's "-S," it's LAN Lite.

For example:

  WS-C2960S-48LPS-L is LAN Base.

WS-C2960S-48TS-S is LAN Lite.

2.  The output from the "show license" Cisco IOS Software command-line  interface (CLI) command. If LAN Base is being used, that will be the  active license. If it's LAN Lite, that will be the active license. In  the following example output, LAN Base is the active license.

C2960-S_Switch# show license

Index 1 Feature: lanlite

Period left: 0 minute 0 second

Index 2 Feature: lanbase

Period left: Life time

License Type: Permanent

License State: Active, In Use

License Priority: Medium

License Count: Non-Counted

Q. Do I need a software license for Cisco Catalyst 2960-S Series Switches?

A. No. Cisco Catalyst 2960-S Series Switches use the Universal image, but  no license is required. The feature is bound to the hardware model type  and cannot be changed.

For  convenience, a single software image is used for all Cisco Catalyst  2960-S Series Switches, regardless of whether they are a LAN Base or LAN  Lite model.

Q. Can a Cisco Catalyst 2960-S Series LAN Lite switch be upgraded to LAN Base?

A. No. The feature set is bound to the hardware model. To get the features  and capabilities of LAN Base, you must purchase a LAN Base switch.

Cisco Catalyst 2960 and 2960-S Series Switches

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps6406/qa_c67-577519.html

Déjame saber si esta información te sirve.

Saludos,

Bernardo

[derek1804]

Muchas Gracias por su ayuda. Tendre que usar otro dispositivo para enrutar mis vlans. Gracias