el 04-24-2023 07:30 PM
hello team.
yesterday, i got a job to add smart license on 8300
and i've tried cli # license smart reservation
but in device i couldnt find that command
i just found authorization Authorization
clear Clear
export Get or return an export authorization key
factory Execute Smart Licensing Factory commands
import Import authcode, policies, trustcode etc
save Save
sync Sync with CSLU/CSSM.
trust Establish trust between PI and CSLU/CSSM.
please let me know how can i add smart license on C8300?
the site does not connected with internet because they are bank internal network.
¡Resuelto! Ir a solución.
04-25-2023 08:55 AM - editado 04-25-2023 08:57 AM
Hi
Below you will find a couple of useful links:
You could grant temporarely internet access to the management IP or interface.
Regards.
el 04-25-2023 09:15 AM
To add a Smart License to a Cisco C8300 router without an internet connection, you can use the following steps:
1) Generate a token from the Cisco Smart Software Manager (CSSM) website, which is where you would normally manage licenses for your devices.
2) Transfer the token to the C8300 using a USB flash drive or some other method.
3) Import the token on the C8300 using the following command:
- license smart import usbflash0:<token_file>
4) Replace <token_file> with the name of the token file that you transferred to the router.
5) Verify that the license has been added using the following command:
- show license all
This command will display a list of all licenses currently installed on the router, including the Smart License.
**Remember to support with a like to keep the community active***
**Please, if the information was helpful, mark this answer as correct.***
04-25-2023 08:55 AM - editado 04-25-2023 08:57 AM
Hi
Below you will find a couple of useful links:
You could grant temporarely internet access to the management IP or interface.
Regards.
el 04-25-2023 09:15 AM
To add a Smart License to a Cisco C8300 router without an internet connection, you can use the following steps:
1) Generate a token from the Cisco Smart Software Manager (CSSM) website, which is where you would normally manage licenses for your devices.
2) Transfer the token to the C8300 using a USB flash drive or some other method.
3) Import the token on the C8300 using the following command:
- license smart import usbflash0:<token_file>
4) Replace <token_file> with the name of the token file that you transferred to the router.
5) Verify that the license has been added using the following command:
- show license all
This command will display a list of all licenses currently installed on the router, including the Smart License.
**Remember to support with a like to keep the community active***
**Please, if the information was helpful, mark this answer as correct.***
Descubra y salve sus notas favoritas. Vuelva a encontrar las respuestas de los expertos, guías paso a paso, temas recientes y mucho más.
¿Es nuevo por aquí? Empiece con estos tips. Cómo usar la comunidad Guía para nuevos miembros
Navegue y encuentre contenido personalizado de la comunidad