Hi,
I have some Catalyst 9500-48Y4C in version 17.12.04. Some of them are in stackwise virtual mode and some other are standalone. When I do a snmpwalk on a standalone C9500 to see the "entPhysicalDescr" (.1.3.6.1.2.1.47.1.1.1.1.2), all interfaces are correctly indexed. But when I do this command on stackwise virtual c9500, some interfaces are not correctly indexed and the results values don't correspond with the description:
iso.3.6.1.2.1.47.1.1.1.1.2.2288 = STRING: "SFP+ 10GBASE-LR"
iso.3.6.1.2.1.47.1.1.1.1.2.2289 = STRING: "Twe2/0/30 Module Temperature Sensor"
iso.3.6.1.2.1.47.1.1.1.1.2.2290 = STRING: "Twe2/0/30 Supply Voltage Sensor"
iso.3.6.1.2.1.47.1.1.1.1.2.2291 = STRING: "Twe2/0/30 Bias Current Sensor"
iso.3.6.1.2.1.47.1.1.1.1.2.2292 = STRING: "Twe2/0/30 Transmit Power Sensor"
iso.3.6.1.2.1.47.1.1.1.1.2.2293 = STRING: "Twe2/0/30 Receive Power Sensor"
iso.3.6.1.2.1.47.1.1.1.1.2.2294 = STRING: "SFP+ 10GBASE-LR"
iso.3.6.1.2.1.47.1.1.1.1.2.2295 = STRING: "Twe2/0/31 Module Temperature Sensor"
iso.3.6.1.2.1.47.1.1.1.1.2.2296 = STRING: "Twe2/0/31 Supply Voltage Sensor"
iso.3.6.1.2.1.47.1.1.1.1.2.2297 = STRING: "Twe2/0/31 Bias Current Sensor"
iso.3.6.1.2.1.47.1.1.1.1.2.2298 = STRING: "Twe2/0/31 Transmit Power Sensor"
iso.3.6.1.2.1.47.1.1.1.1.2.2299 = STRING: "Twe2/0/31 Receive Power Sensor"
iso.3.6.1.2.1.47.1.1.1.1.2.2300 = STRING: "Twe2/0/7 Receive Power Sensor"
iso.3.6.1.2.1.47.1.1.1.1.2.2301 = STRING: "Hu1/0/50 Lane 1 Bias Current Sensor"
iso.3.6.1.2.1.47.1.1.1.1.2.2302 = STRING: "Hu1/0/50 Lane 2 Bias Current Sensor"
iso.3.6.1.2.1.47.1.1.1.1.2.2303 = STRING: "Hu1/0/50 Lane 3 Bias Current Sensor"
iso.3.6.1.2.1.47.1.1.1.1.2.2304 = STRING: "Hu1/0/50 Lane 4 Bias Current Sensor"
iso.3.6.1.2.1.47.1.1.1.1.2.2305 = STRING: "Hu1/0/50 Tx Lane 1 Power Sensor"
iso.3.6.1.2.1.47.1.1.1.1.2.2306 = STRING: "Hu1/0/50 Tx Lane 2 Power Sensor"
iso.3.6.1.2.1.47.1.1.1.1.2.2307 = STRING: "Hu1/0/50 Tx Lane 3 Power Sensor"
iso.3.6.1.2.1.47.1.1.1.1.2.2308 = STRING: "Hu1/0/50 Tx Lane 4 Power Sensor"
iso.3.6.1.2.1.47.1.1.1.1.2.2309 = STRING: "Hu1/0/50 Rx Lane 1 Power Sensor"
iso.3.6.1.2.1.47.1.1.1.1.2.2310 = STRING: "Hu1/0/50 Rx Lane 2 Power Sensor"
iso.3.6.1.2.1.47.1.1.1.1.2.2311 = STRING: "Hu1/0/50 Rx Lane 3 Power Sensor"
iso.3.6.1.2.1.47.1.1.1.1.2.2312 = STRING: "SFP+ 10GBASE-LR
has anyone encountered this problem before? Is this a bug or is there a workaround for this problem?
thank you for your help
