Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I have some Catalyst 9500-48Y4C in version 17.12.04. Some of them are in stackwise virtual mode and some other are standalone. When I do a snmpwalk on a standalone C9500 to see the "entPhysicalDescr" (.1.3.6.1.2.1.47.1.1.1.1.2), all interfaces are...
Hi,I would like to deny SSH and SNMP traffic to an ip address of a SVI. Before with the cat4500x, it was possible to drop this traffic with QoS and an ACL on Control Plane like this: class-map match-all NON_OOB_INTERFACE match access-group name ...
Hi,
in the documentation of the catalyst 9200 switch, we can read:
For Catalyst 9200 Series switches the maximum is 4 VRFs on the modular models and 1 VRF on fixed models.
somebody knows if this "4 VRFs" is a "hardware" limitation or "software" l...
Hi,
In our campus, we're using 2 WLC 5508 with 8.2.141.0 firmware... 3 months ago, we installed 50 aironet 2800i..
we've followed the best pratices for the configuration and for the 5Ghz radio we've set the channel width to "best" (auto 20 - 40 or 8...
Hi,few days ago, we received these logs from a 3750-X stack (IOS version 15.0(2)SE2):Mar 8 11:11:52.680: %PKI-4-TRUSTPOOL_EXPIRATION_WARNING: The Trustpool will expire in 20 daysMar 8 11:11:52.680: %PKI-4-TRUSTPOOL_AUTO_UPDATE_DISABLED: Auto-trustp...
Hi M02@rt37,thanks for your response.. I have already apply ACL on vty and ACL on the snmp-server command but for me it's not enough.. I take the example of snmp ... With ACL on snmp-server command, I can filter for example the ip address or subnet t...
