Hi Experts,
I am trying to turboboot an ASR9006 RSP from rommon, the problem I am having is I can ping the TFTP server I uploaded few codes from the CLI but when I do that from the rommon I am getting the following error, Please advise!!!!
here is the configs and the logs that I am seeing:
rommon B56 > set
PS1=rommon ! >
ReloadReason=71
TFTP_RETRY_COUNTMEOUT=10000
BOOT_DEV_SEQ_CONV_SEQ_OPER=
TFTP_RETRY_COUNTTFTP_TIMEOUT=10000
BOOT_DEV_SEQ_CONF=
BOOT_DEV_SEQ_OPER=
TFTP_RETRY_COUNTUT=10000
IP_ADDRESS=10.233.30.87
IP_SUBNET_MASK=255.255.255.192
DEFAULT_GATEWAY=10.233.30.65
TURBOBOOT=on,disk0,format
TFTP_TIMEOUT=10000
TFTP_VERBOSE=1
TFTP_CHECKSUM=1
TFTP_RETRY_COUNT=8
IOX_ADMIN_CONFIG_FILE=
ACTIVE_FCD=1
BSI=0
CLUSTER_NO_BOOT=Q_CONF=
TFTP_PORT=
TFTP_UDP_PORT=
TFTP_MGMT_INTF=0
TFTP_FILE=/asr9k-mini-px.vm-5.3.4
TFTP_SERVER=172.28.39.60
?=0
rommon B57 >
rommon B154 > boot tftp://10.233.30.222//asr9k-testing/Archive/asr9k-mini-p.vm-4.0.3
IP_ADDRESS: 10.233.30.87
IP_SUBNET_MASK: 255.255.255.192
DEFAULT_GATEWAY: 10.233.30.65
TFTP_SERVER: 10.233.30.222
TFTP_FILE: /asr9k-testing/Archive/asr9k-mini-p.vm-4.0.3
Performing tftpdnld
Mgt LAN 0 interface is selected
tsec_init_hw: configuring FE (port 1) for: Auto Speed, Auto Duplex
tsec_init_interface: hardware initialization completed
Receiving /asr9k-testing/Archive/asr9k-mini-p.vm-4.0.3 from 10.233.30.222 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
udp_process_packet: 161 is an unregistered, non-supported UDP port.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
udp_process_packet: 161 is an unregistered, non-supported UDP port.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
udp_process_packet: 161 is an unregistered, non-supported UDP port.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
udp_process_packet: 161 is an unregistered, non-supported UDP port.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
udp_process_packet: 161 is an unregistered, non-supported UDP port.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
udp_process_packet: 161 is an unregistered, non-supported UDP port.!!!!!!!! [CTRL-C]
TFTP: Operation aborted.
