11-22-2023 06:33 AM
Hi guys, (my current esa version is 15.0.0-104
I received an email that was aborted because of a TLS handshake failure. The reason for the failure is unknown.
Here's my SSL configuration.
any idea what cause email aborted?
thanks,
Solved! Go to Solution.
11-22-2023 08:38 AM
Assuming you have the default setting, they didn't transfer the email in the 5 minute time limit and were disconnected.
you can check under listeners and it's the global setting.
11-24-2023 11:00 AM
It is odd it is negotiating TLS, but you really don't see the start of the email transmission. you are not seeing the from, to, etc. This could be an issue on the sending side as it may not be accepting the commands.
Is this just happening with one sender?
You could change the unsuccessful to say 10 min and see if the error happens in 10 min and at least know what is triggering the disconnect.
11-22-2023 08:38 AM
Assuming you have the default setting, they didn't transfer the email in the 5 minute time limit and were disconnected.
you can check under listeners and it's the global setting.
11-23-2023 05:33 PM
Thanks for your answer dustin,
so for timeout 5min,
So it's possible that this is causing the error, are there any tests we can do to make sure that this isn't a problem in my area
regards,
11-24-2023 11:00 AM
It is odd it is negotiating TLS, but you really don't see the start of the email transmission. you are not seeing the from, to, etc. This could be an issue on the sending side as it may not be accepting the commands.
Is this just happening with one sender?
You could change the unsuccessful to say 10 min and see if the error happens in 10 min and at least know what is triggering the disconnect.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide